» HORIZONTAL SWIVEL BRACKETS CAN BE USED UP TO A 45° ANGLE FOR TREX ENHANCE STEEL PANEL RAILINGS. » W HEN USING HORIZONTAL SWIVEL BRACKETS VERY IMPORTANT TO LAY OUT LOCATION AND ORIENTATION OF POSTS AND SWIVEL BRACKETS BE- FORE INSTALLING SWIVEL BRACKETS. HOW TO INSTALL HORIZONTAL SWIVEL BRACKETS
1
Attach Lower Swivel Brackets to Enhance Steel Posts 1. M easure 3 3/16" (8.1 cm)
Installing Upper Swivel Brackets to Enhance Steel Posts
3" (7.6 cm)
4
from top of post base plate. Mark with light line.
2
2. Center lower bracket on post above the marked line and attach using two #12 x 3/4 self-drilling screws (provided).
4. P lace panel into lower swivel brackets. Place upper swivel brackets temporarily onto top rail and mark post at underside of bracket location. If necessary use a clamp to hold brackets on top rail.
How to Measure and Cut Bottom and Top Railings (When Required)
5
5. C enter upper bracket on post above marked line
3
and attach using two #12 x 3/4" self-drilling screws (provided) .
Installing Panel to Brackets 6. Attach panels to brackets as per previous instruc- tions.
3. W ith lower brackets in correct swivel location, measure distance from inside of bracket to inside of bracket. Also allow for 1-1/2" clearance on each side for panel rails to attach to brackets. Cut panel as per previous instructions.
7. Attach bracket covers, caps, and skirts as per previous instructions.
RUST-OLEUM® is a trademark of Rust-Oleum Corporation
303
Made with FlippingBook - Online Brochure Maker