TREX FASCIA INSTALLATION RECOMMENDATIONS
Using Fascia to Box in Stairs Cutting Fascia Method 1: Stair Stringer as Template
1a
2
Fascia
1a. Using a stair stringer as a template, lay this on the fascia and trace out pattern for stair stringer, ensur- ing you also factor in stair tread/deck board thick- ness and riser thickness before cutting. This option is shown above. Proceed to step 3.
2b. Once completed place fascia in proper location and trace around stair treads and risers and then cut to fit.
Method 2: Fascia Beside Decking
Installing Fascia To Stringers
3
1b
Fascia
Spacer
1b. Another option is cutting fascia plumb to the rim joist at the top and flush at the bottom of the stairs as shown.
3. Spacers should be installed like that of standard decking, ensuring these are spaced 9” apart (see previous page for detailed information on all require- ments for spacers).
37 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker