FASCIA MOUNT (OUTSIDE FRAME CORNER)
» 3/4" (19 MM) FASCIA MUST BE USED, OR BOLTS MUST BE CUT DOWN. » INSTALL POST TIGHTLY ON RIM JOIST FIRST – NUTS WILL BE INACCESSIBLE LATER. » MUST USE TREX FASCIA MOUNT CORNER BRACKET KIT.
Trex Fascia Mount Corner Bracket (Kit)
Trex Fascia Mount Kit (L Bracket)
3/4 " (19 mm) Fascia
3 Bolts 1/2 " x 6 " (13 mm x 152 mm), Nuts, and Washers
1 Bolt 1/2 " x 10 " (13 mm x 254 mm), Nut, and Washer
NOTE: If a L70Z is in this location, it must be removed so post mount will fit properly.
Simpson L70Z
Simpson LUS28Z
Front Rim Joist
Side Joist
Simpson DTT2Z
1. Install post on rim joist and fully tighten using Simpson DTT2Z on top bolt. 2. Run 10" (254 mm) bolt through gap in existing Simpson DTT2Z and tighten into second DTT2Z. 3. Install bottom bolt. TREX SIGNATURE RAILING APPLICATIONS Installation of Railing 1. All required hardware is included with Trex Signature railing, follow Trex Signature railing instructions for complete installation requirements.
68 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker