HOW TO INSTALL HORIZONTAL LINE AND CORNER CROSSOVER BRACKETS TREX SIGNATURE®
PARTS
A. Line Crossover Bracket B. Corner Crossover Bracket C. Wedge Plate D. V-Wedge E. 5/16" x 2" SS Bolt F. 5/16" SS Nut (1/2" wrench size) G. Line Crossover End Cap
A
B
C
E F
G
D
IMPORTANT NOTE REGARDING CUTTING SIGNATURE POSTS: » Signature posts must be cut to proper length when using crossover brackets: 36" rail height – cut post to 34" height (measured from deck surface) 42" rail height – cut post to 40" height (measured from deck surface)
Wedge Plate Assembly
2
1
1. Insert the bolt through the hole in wedge plate.
2. Align and insert the wedge plate with bolt into the v-wedge. Slide the wedge plate in until the ends are flush with the ends of the v-wedge.
82
Made with FlippingBook - Online Brochure Maker