HOW TO INSTALL HORIZONTAL LINE AND CORNER CROSSOVER BRACKETS/ CONTINUED TREX SIGNATURE ®
Installing Wedge Plate Assembly Into Top of Post
3
4b
1/4" (.64 cm)
Bottom of threads
4b. Place the corner crossover bracket over the bolt onto the end of the post.
3. Insert assembly (from step 2) into the top of post. Stop when top of v-wedge is about 1/4" into top of post.
5
Note: Threads of bolt will be slightly above the end of the post.
4a
1
5. Thread the nut onto the bolt. When attaching crossover end cap, slide u-channel on end cap under the nut until cap is flush with the end of the bracket. End cap is for use with the line crossover bracket only (when terminating a rail at a line crossover post).
4a. Place the line crossover bracket over the bolt onto the end of the post.
6. Tighten the nut to
6
10 ft·lbs with a torque wrench with 1/2" socket adapter.
IMPORTANT NOTE: For Line Crossover Bracket: Align the bracket such that the rail channel is perpendicular (90°) to the length of the wedge plate assembly.
2
83 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker