HOW TO INSTALL HORIZONTAL SWIVEL BRACKETS TREX SIGNATURE ® STANDARD
Attach Swivel Brackets Base Using Trex Signature Posts TIP: Use a clamp to help hold brackets in place while fastening with screws.
Attach Swivel Brackets Using Pressure-Treated Posts and Post Sleeves TIP: Use a clamp to help hold brackets in place while fastening with screws.
2
1
1. Measure 1-3/8"
1
(3.5 cm) from top of post base plate or 1-7/8" (4.8 cm) from decking surface. Mark with light line.
2-1/2" Post
1-3/8" (3.5 cm)
1-7/8" (4.8 cm)
1. M easure 1-7/8" (4.8 cm) up from deck surface to bottom of bracket. Mark with light line. 2. C enter lower bracket on post above the marked line and attach using four 2" (5.1 cm) wood screws (provided) .
2
3
32-5/16" (82.0 cm) or 38-5/16" (97.3 cm)
3
4
32-5/16" (82.0 cm) or 38-5/16" (97.3 cm)
2. C enter lower bracket on post above the marked line and attach using four self-tapping screws (provided) . 3. M easure up 32-5/16" (82.0 cm) for 36" (91.4 cm) tall railing or 38-5/16" (97.3 cm) for 42" (106.7 cm) tall railing from top of lower rail bracket. Mark with a light line. 4. Center upper bracket on post below marked line 4
3. M easure up 32-5/16" (82.0 cm) for 36" (91.4 cm) tall railing or 38-5/16" (97.3 cm) for 42" (106.7 cm) tall railing from top of lower rail bracket. Mark with a light line. 4. C enter upper bracket on post below marked line and attach using four 2" (5.1 cm) wood screws (provided) .
and attach using four self-tapping screws (provided) .
NOTE: Upper bracket is not required on
crossover post configuration.
97
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker