GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
The instructor shall:
Present and demonstrate examples of how to do a visual inspection of all bolts and bolt connections for completeness and tightness. Lead or facilitate a discussion on bolts and bolt connections and their completeness and tightness.
The participants shall:
Engage in discussions and share experiences on bolt and bolt connections and their completeness and tightness.
Conduct a short questionnaire test to recap the theory and safety issues from lesson 11.
Check own answers and solutions from the shown fact list on completion of the test.
Lesson 12 - DRIVE AND SAFETY WIRE ROPE AND RACK
40 min.
The aim of this lesson is to enable the participants to test and ensure the functionality of drive and safety ropes and racks in accordance with the relevant manuals and inspection lists.
After successfully having completed lesson 12 of the Lift Commission and Inspection Module:
The participants can explain how to do a visual inspection of drive and safety ropes according to ISO 4309 (Knowledge, intermediate level).
Learning objectives:
The participants can perform a visual inspection of the diameter of drive rope and safety rope in unloaded state at 3 points: bottom, middle & top (Skills, intermediate level).
The instructor shall:
Demonstrate how to inspect drive and safety ropes.
Facilitate practical training on inspecting drive and safety ropes.
Provide feedback to the participants on their performance during the practical training.
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises.
Global Wind Organisation www.globalwindsafety.org
46 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online