GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
Lead or facilitate discussion on wear on racks, how to do a visual inspection of the rack, and what to do in case of detecting excessive wear on the rack.
The participants shall:
Engage in discussions and share experiences on wear on racks in WTG.
Learning objective:
The participants can describe how to inspect if a rack and a pinion is sufficiently greased (Knowledge, basic level).
The instructor shall:
Present examples of how to recognise when a rack and a pinion is sufficiently greased, and explain how to find guidance in the relevant manuals.
The participants shall:
Engage in discussions and share experiences on greasing rack and pinions in WTG.
Conduct a short questionnaire test to recap the theory and safety issues from lesson 12.
Check own answers and solutions from the shown fact list on completion of the test.
Lesson 13 - TRACTION HOIST
35 min.
The aim of this lesson is to enable the participants to take responsibility of the general condition and functionality of the traction hoist in accordance with the relevant manuals and inspection lists.
After successfully having completed lesson 13 of the Lift Commission and Inspection Module:
The participants can take responsibility of visually inspecting the general condition of the traction hoist in a lift as guided in the relevant manuals (Ability, intermediate level). The participants can perform a function test of the traction hoist as described in the relevant manuals (Skills, intermediate level).
Learning objectives:
The participants can perform a function testof the traction hoist (Skills, intermediate level). The participants can perform avisual inspection of the wire in the traction hoist in the lift (Skills, intermediate level).
Global Wind Organisation www.globalwindsafety.org
50 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online