HOOKS&POSITIONINGDEVICES
LIGHTWEIGHTHOOKS LightWeightSteel.HeavyPerformance.
The Reliance snap hook assortment has been at the leading edge since the development of our Steelhead™ hook, more than 13 years ago. The national consenus standards requirements for gate strength were increased in 2007 in large part due to the introduction of the Steelhead™. Over the years, there has been an increased demand for lighter weight connectors, stimulating the introduction of many aluminumcarabiners and snap hooks in themarket place. The downside is that when eccentrically loaded, aluminumsimply struggles tomeasure up. Wearepleased to introducea reducedweight snaphookand rebar hook, forged fromchro-moly steel according toour patenteddesign.Thesehooks rival the light weight of aluminumwith far superior strength and security.We are in the process of integrating these hooks as standard equipment on our line of energy absorbing lanyards. Keep it real, gowith steel! LightWeightRebarHook
Specifications Material: SAE 4140 Alloy Steel Finish: YellowChromate Strength: • Major Axis: 5,000 lbs+ • Gate Face: 3,600 lbs+ • Side Load: 3,600 lbs+ •
Part Number: 3011-WR Based on our classic 3011 fan-gate design, this rugged rebar hook tips the scales at only 1.35 lbs vs. the 1.75 lbs in our previous design. Addtionally, this hook exceeds the 3,600 lb transverse-load requirements of the soon-to-be published revision of the ANSI/ASSE Z359.12 connector standard. Most aluminum rebar hooks today will fail to meet those requirementswhen the standard takes effect in late 2018.
Transverse Load: 3,600 lbs+
Specifications Material: SAE 4140 Alloy Steel Finish: YellowChromate Strength: • Major Axis: 5,000 lbs+ • Gate Face: 3,600 lbs+ • Side Load: 3,600 lbs+ • Transverse Load: N/A Weight: .75 lbs Standards: Meets the requirements of ANSI/ASSE Z359.12, Title 29 CFR, Subparts I &M Weight: 1.35 lbs Standards: Meets the requirements of ANSI/ASSE Z359.12, Title 29 CFR, Subparts I &M
LightWeightPelicanHook Part Number: 3006-WR
Based on our classic 3006“Pelicanhead”design, this snap hookweighs only .75 lbs as opposedtothe .95lbweightof itspredecessor. This hook is being introduced to the line-up first in our Stoplite II series of personal SRL’s and will be available as a part of a new series of lanyards in the second half of 2018. They canbeutilized inexistingproducts on request – contact a Reliance distributor for additional details.
POSITIONINGDEVICES Positioning devices effectively limit aworker’s exposure to potential fall hazards and are designed to perform in the toughest of environments.
PositioningLanyard 711954 1”polyester, web loop, 3/4”snaphook
Rebar ChainAssembly 726001 14”, 2 ea 3/4”hooks, 1 ea 2-1/4”hook
AdjustableLanyard 717106 3.5’- 6’, 1”polyester, 2 ea 3/4”snaphooks
www.relsafe.com
(888) 362-2826
30
Made with FlippingBook - professional solution for displaying marketing and sales documents online