Fluke Loop Calibrators are ideal for a wide variety of calibration applications from 4 to 20 mA. mA Loop Calibrators
709 Precision Loop Calibrator
709H Precision Loop Calibrator with HART Communications/ Diagnostics
710 mA Loop Valve Tester Designed to enable users to perform quick, easy tests on HART smart control valves. • Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke test • Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts read • ValveTrack™ Software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory www.fluke.com/au/710
Reduces the time it takes to measure or source voltage or current and power up a loop. • Best-in-class accuracy at 0.01% reading • Small rugged design • Intuitive user interface with Quick-Set knob for fast setup and easy use • Built-in selectable 250 Ω resistor for HART communication • 24 V DC loop power with mA Measure Mode (-25% to 125%) • Resolution of 1 µA on mA ranges and 1 mV on voltages ranges www.fluke.com/au/709
Designed to save time and produce high-quality results. • HART Communication built in for easy HART device maintenance • Best-in-class accuracy at 0.01% reading • Small rugged design operates on six standard AAA batteries • Intuitive user interface with Quick-Set knob for fast setup and easy use • Built-in selectable 250 Ω resistor for HART communication www.fluke.com/au/709H
707 Loop Calibrator A high performance, extremely fast and easy-to-use solution for calibration, repair and maintenance of current loops. • mA sourcing, simulation and measurement • 24 V loop supply with mA measure, including 250 Ω HART resistor • 0 V DC to 28 V DC measurement to check loop voltage • NIST traceable calibration www.fluke.com/au/707
705 Loop Calibrator A cost-effective, integrated solution for calibration, repair and maintenance of current loops. • mA sourcing, simulation and measurement • Simultaneous mA and % of span display • 24 V loop supply with mA measure • 0 V DC to 28 V DC measurement to check loop voltage • NIST traceable calibration www.fluke.com/au/705
707Ex IS Loop Calibrator An intrinsically safe loop calibrator for use in explosion endangered areas. Certified in accordance with the ATEX directive in Zones 1 and 2. • Measures V DC to 28 V • 0-20 mA or 4-20 mA default startup modes • HART ® compatible resistance is connected in series with the loop supply for compatibility with HART communicators www.fluke.com/au/Ex
9
Electrical, Multifunction and mA Loop Calibration
Made with FlippingBook Learn more on our blog