Precise pressure generation for comparing a device under test to a master gauge. Pressure Comparators
P5510 Gas Pressure Comparator
P5513 Gas Pressure Comparator High quality, precise gas
P5514 Hydraulic Pressure Comparator Easy, efficient hydraulic pressure generation.
Easy, efficient pressure and vacuum generation in a single device. • Pressure to 2 MPa (300 psi) • Vacuum to -80 kPa (-12 psi) au.flukecal.com/P5510
pressure generation and control. • Precise pressure regulation to 210 MPa (3,000 psi) with high quality needle valves • Built-in screw press for fine pressure adjustment au.flukecal.com/P5513
• Generate and precisely adjust pressure to 70 MPa (10,000 psi) • Compatible with a wide range of fluids au.flukecal.com/P5514
P5515 Hydraulic Pressure Comparator High quality, precise hydraulic pressure generation and control. • Generate and precisely adjust pressure to 140 MPa (20,000 psi) • Integrated hand pump for system priming and large volume applications au.flukecal.com/P5515
700HPPK Pneumatic Test Pump Kit Rugged and portable way to generate pressure in the field quickly, safely and easily. • Generates and adjusts pneumatic pressure up to 21 MPa • Reaches pressure in 20 seconds to full scale into a 30 cm 3 volume au.flukecal.com/700HPPK
Complete Bench Top Pressure Calibration Solution Combine P5500 comparison test pumps with one or more 2700G reference pressure gauges for a complete 0.02% accuracy calibration system.
The 2700G has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping and auto off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa and psi. The 2700G Reference Pressure Gauge can be combined with the Fluke Calibration P5500 series of comparison test pumps to make a complete pressure calibration system. The unique test port design of the P5500 series allows for hand tight connection of the 2700G without the use of PTFE tape.
17
Pressure Calibration
Made with FlippingBook Learn more on our blog