2M Series Backshells and Accessories 2M809S060, 2M809A060 Shrink Boots
Micro 38999
The 2M Series of Shrink Boots is intended for use with the 2M series of connectors supplied with Banding Platforms. All shrink boots are supplied pre-coated with Hi-Temperature, Hot-Melt adhesive that will seal the boot to both the cable and connector. The boots also contains a lip that will lock on to a groove on the connector for improved strain relief.
High Performance Elastomer - Lipped Shrink Boot
• Pre-coated with Adhesive • Operating Temperature: -70°C to +150°C • Rated for 3000 hrs. continuous operation at +150°C • Excellent resistance to fuels, oils, and solvents
Straight Shrink Boots Part Number Pre-Coated with Hi- Temp Hot-Melt Adhesive
Right Angle Boots Part Number
Shell Size
Boot Size
Series 2M801, 2M803, 2M804
Series 2M805
Pre-Coated with Hi- Temp Hot-Melt Adhesive
2M809S060-1G 2M809S060-2G 2M809S060-3G 2M809S060-4G 2M809S060-5G 2M809S060-6G
2M809A060-1G 2M809A060-2G 2M809A060-3G 2M809A060-4G 2M809A060-5G 2M809A060-6G
1
5
N/A
2
6, 7
8,9
3
8, 9
10,11
4
10, 12, 13 12, 15
Material
Spec
5 14, 15, 16, 17 18, 19
Fluid Resistant Polymer
VG 95343 Part 6
6
21
23
Zero Halogen - Lipped Shrink Boots
Straight Shrink Boot Part Number Pre-Coated with Hi- Temp Hot-Melt Adhesive
Right Angle Shrink Boots Part Number Pre-Coated with Hi- Temp Hot-Melt Adhesive
• Low Smoke, Zero Halogen • Toxicity Requirements: Meets U.S. and EU standards • Pre-coated with Adhesive • Operating Temperature: -30°C to +125°C • Good resistance to fuels, oils, and solvents
Shell Size
Series 2M801, 2M803, 2M804
Series 2M805
Boot Size
2M809S060-1H 2M809S060-2H 2M809S060-3H 2M809S060-4H 2M809S060-5H 2M809S060-6H
2M809A060-1H 2M809A060-2H 2M809A060-3H 2M809A060-4H 2M809A060-5H 2M809A060-6H
1
5
N/A
2
6, 7
8,9
3
8, 9
10,11
4
10, 12, 13 12, 15
5 14, 15, 16, 17 18, 19
Material
Spec
6
21
23
Low Smoke Halogen Free
NAVSEA 5617649
Size 1 right angle supplied less lip see page 108
Series 2M Torque Values
Series 2M801, 2M803, 2M804, 2M805 Recommended Torque Values
Backshell Tightening In-LBs. N-m
Shell Size Series 2M805
Shell Size Series 2M801, 2M803, 2M804
Min.
Max.
Min.
Max.
5 6 7 8 9
-
13 17 1.5 1.9 18 22 2.0 2.5 30 40 3.4 4.5 30 40 3.4 4.5 35 45 4.0 5.1 35 45 4.0 5.1 35 45 4.0 5.1 35 45 4.0 5.1 35 45 4.0 5.1 35 45 4.0 5.1
8 9
10 11 12 15 18 19 23
10
12, 13 14, 16 15, 17
21
JB
121
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Made with FlippingBook flipbook maker