2M Series Performance Specifications Complete Product Specifications
DESCRIPTION
REQUIREMENT MECHANICAL
PROCEDURE
No discontinuity of greater than 1 microsecond, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle. Connectors shall meet electrical requirements after vibration test. No discontinuity of greater than 1 microsecond, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle. Connectors shall meet electrical requirements after vibration test. No discontinuity of greater than 1 microsecond, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle. Connectors shall meet electrical requirements after vibration test. No discontinuity of greater than 1 microsecond, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle. Connectors shall meet electrical requirements after shock test. No deterioration which will adversely affect the connector after 2000 cycles (where applicable) of mating and unmating. Connectors shall meet contact resistance, insulation resistance, shell-to-shell resistance, DWV, and mating and unmating force.
MIL-STD-202 Method 204, test Condition G 12 sweep cycles per axes, 20 min. per 10-2000-10Hz @ temp.
Vibration, Sine
2M801/2M805 - 60 g 2M803/2M804 - 30 g
EIA-364-28 Test Condition V Letter I 100 milliamp test current 50- 2,000 Hz @ temp.
Vibration, Random
2M801/2M805 - 43.9 g RMS 2M803/2M804 - 37.80 g RMS
Gunfire Vibration
MIL-STD-810F Method 519.5
EIA-364-27 Condition D 300 G, halfsine, 3ms, 3 axes
Mechanical Shock
Mechanical durability, at ambient temperature
EIA-364-09
EIA-364-52 Category 3 8 hours steam aging prior to test 245° C, 4-5 sec. dwell 10X magnification
95% solder coverage. Smooth, bright and even finish.
Solderability, PC tail contacts
No damage to connector. Connectors shall meet insulation resistance and waterproof sealing requirements.
EIA-364-56 260° C, 10 seconds (PC tail)
Resistance To Soldering Heat
Please refer to the comprehensive 2M Series Product Specification for additional parameters and test methods. Filter and Hermetic designs have different specifications. (Please refer to individual sections)
B 24
C
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Made with FlippingBook flipbook maker