1. When you print your artwork, DO NOT print in mirror image.
2. Remove the clear plastic protective layer only from the back of the Sublimer for now, before pressing. This is the plastic covering the white side of the Sublimer 2-Tone, where your print will go. Leave the plastic on the other side in place while pressing to protect the front.
3. The 2-tone Sublimer has a clear front and a white back. When placing your print, ensure it faces the white side of the Sublimer at the back, as it will show through to the front after pressing. Use heat tape to secure the print to the 2-tone Sublimer.
4. Make sure you set the pressure of the press BEFORE you switch the press on.
Setting the pressure: * For small Sublimer pieces like the keyrings, apply very low pressure. * For medium-size Sublimers for example coaster sizes set the pressure to light-medium . * For large 20x20cm size Sublimer, use medium-high pressure. * But for pointy, sharp edge type products Big or small like Triangles, see Pages 5-6 for tips on this. NB! If you notice cracks in the printed or coated side of the Sublimer, or if the edges appear flattened or slightly melted after pressing, your pressure is too high. If you see white or unprinted areas, your pressure is too low.
2 | P a g e
Made with FlippingBook - professional solution for displaying marketing and sales documents online