5. Once your pressure is correctly set, adjust your press to 200°C and press for 70 seconds .
6. Make sure you have the following ready:
- Place one sheet of copy paper on the table next to your press to set the hot Sublimer on immediately after pressing. - Have two full reams/packs of copy paper ready to place on top of the Sublimer while it cools. This will keep it flat and prevent bending or warping as it cools down.
7. Apply the Print to the 2Tone Sublimer. The print should face the white side of the Sublimer. Secure with heat tape.
8. For all 2-tone Sublimer products, place the product in the hot heat press. First with the print being at the bottom and the Sublimer on top.
9. Now hold the hot element of the press very close to the Sublimer, without touching it . Keep it there for 70–100 seconds to preheat this side before pressing the other side.
3 | P a g e
Made with FlippingBook - professional solution for displaying marketing and sales documents online