The final products, nice and flat:
TIPS TO AVOID FLATTEN OUT SHARP CORNERS ON BIG OR MEDIUM SIZE SUBLIMER 2-TONE
1. Use low pressure even on the big or medium sizes for these ones. 2. Secure all sides properly with heat tape, so that the paper doesn’t move, to get steps 4-5 below right.
3. Place the sublimer at the front of your press where there is less pressure. The side closest to you. Press for 200 degrees and 70 seconds. DO NOT REMOVE THE PRINT AFTER PRESSING.
5 | P a g e
Made with FlippingBook - professional solution for displaying marketing and sales documents online