10. After the Sublimer is heated, quickly turn it over so the print is on top and the Sublimer is underneath. Immediately close the press before it cools, and press for 70 seconds.
11. When time is up: • Open the press and quickly remove the print. • Work fast — place the Sublimer on top of copy paper next to the press. • Make sure the picture is facing you and the back is facing the paper on the table. This is important, as placing the wrong side down first may cause warping. • Immediately place two reams of copy paper on top.
1. Remove Print
2. Lift Sublimer from press
3. Move Sublimer to copy paper, let picture face you.
4. Place reams of copy paper on top
NB! Let the Sublimer cool completely before removing the stacks of paper. This is especially important for large pieces like clocks — lifting the paper packs before the Sublimer has cooled can cause warping. 12. After the sublimer is cooled down, remove the last protective plastic layer from the sublimer at the front.
4 | P a g e
Made with FlippingBook - professional solution for displaying marketing and sales documents online