The final products, nice and flat:
13. T o press the metal piece, use 190 degrees and 90 seconds medium-high pressure. Make sure the print is on top of the metal facing the metal. Make sure to print only the top area of the metal so that your artwork doesn’t go underneath the wooden piece that will be applied in the end.
TIPS TO AVOID FLATTEN OUT SHARP CORNERS ON BIG OR MEDIUM SIZE SUBLIMER 2-TONE
1. Use low pressure even on the big or medium sizes for these pointy Sublimer products. 2. Secure all sides properly with heat tape to the print, so that the paper doesn’t move, to get steps 4-5 right below.
5 | P a g e
Made with FlippingBook - professional solution for displaying marketing and sales documents online