3. Place the sublimer at the front of your press where there is less pressure. The side closest to you. Press for 200 degrees and 70 seconds. DO NOT REMOVE THE PRINT AFTER PRESSING.
4. After you press it, turn it around to see how it transferred. Because you used low pressure, you might notice blank untransfered areas on your sublimer. That is because the lowest pressure is on the front edge of the press. If you don’t see faded areas, just place it underneath a heavy object. If you do see faded spots, go to the next step, it will fix this, and work fast.
5. Quickly turn it upside down again so that the print is on top, and then swing it so that the faded spot is now pointing away from you. Press for another 30 seconds. Remove the print.
6 | P a g e
Made with FlippingBook - professional solution for displaying marketing and sales documents online