Step 4. Put glue on the back of the wooden piece, and make sure that when you apply it, the pointed side of the wood faces the same way as the pointed side of the metal. Do not put the glue on the wrong side, it should look like this. Line the edges up on the right-hand side, especially the bottom as well. You don’t want the trophy to fall over because the bottom pieces are not applied evenly.
Step 5. Now put glue on the back of the printed 2-Tone sublimer and line it up at the bottom with the wood. Centre it in the middle like this, the little corner of the sublimer will stick over the right a little bit:
9 | P a g e
Made with FlippingBook - professional solution for displaying marketing and sales documents online