ELECTRIC PUMPS
WATERMASTER ® IC PUMP CONTROLLER KIT
THE WATERMASTER IC UNIT INTELLIGENTLY CONTROLS THE SUBMERSIBLE PUMP FOR TROUBLE FREE OPERATION AND PEACE OF MIND. NEVER ADjUST YOUR PRESSURE SWITCH AGAIN! Stops the pump pulsating at high voltages Stops the pump running continuously at low voltages Detects when the water container has run dry and turns pump off Surge damper no longer required Protects and prolongs the submersible pump Helps lengthen battery life Built-in fault diagnostics system Service free, one-step calibration process
KIT INCLUDES: Watermaster IC unit Watermaster High Flow submersible pump
Model
Watermaster Pump Controller (with Intelligent Control)
PART NUMBER
EP1632
Weight
0.65kg (1.4 lbs)
Voltage
Voltage range 9.5V d.c. to 14.5V d.c. (normal operation) / Voltage range 8.5V d.c. to 9.5V d.c. (limited operation)
Fuse Size
5 amp / automotive
Materials
Pump body: ABS, Seals: Nitrile®, Strainer: Polypropylene, Impeller: PBT, Cable: PVC, Seal: Nitrile®, Wire: PVC insulated copper, Hose: PVC, Plug: PBT, Watermaster IC: Polycarbonate
Nominal Current
Operating 3.7 amps, Standby 0.007 amps
Operating Temperature
3˚C to 40˚C
Range
Storage Temperature
-30˚C to 60˚C
Range
Accessories
WF1230 – 12mm inline water filter
Performance
Max Discharge Head
Flow rate / Current draw at 12V d.c.
0 m (0ft)
15.8 ltrs/min (3.8 amps)
1 m (3ft)
14.8 ltrs/min (3.7 amps)
3 m (9ft)
12.8 ltrs/min (3.5 amps)
18
WHALEPUMPS.COM
Made with FlippingBook - Online catalogs