Before using this machine, please read this manual.
Handling Precautions
To use the product correctly, as well as to obtain better cutting results, be sure to read the following points thoroughly before use. Note • To avoid bodily injury, handle blades with care. • Physical damage to a new machine caused by customers will not be covered by the warranty, so unfortunately, we cannot offer you a product replacement. Always make a test cut before cutting If cutting conditions, such as blade depth, force, and speed, are not appropriate, the blade tip may break, or the machine may be damaged. Furthermore, the expected cutting results may not be obtained, and the media may be wasted. Optimal cutting conditions vary depending on the thickness and quality of the media used and the degree of wear of the blade. Make a test cut every time you change the media. Guideline for blade depth
Appropriate blade depth = Film thickness + α
Film thickness
Does not cut through the film
Release paper thickness
The most important setting in cutting is to adjust the blade depth. Adjust the blade depth so that the blade protrudes slightly more than the thickness of the media to be cut. When cutting the cutting film, extend the cutter blade more than the film, but not so much that it penetrates the release paper.
Cut through to the release paper
Use the cutting mat for the following circumstances
Be sure to use the cutting mat when cutting the following media. Failure to use the cutting mat may damage the machine. • When cutting media that do not have release papers • When cutting out media (die cut)
3
Made with FlippingBook - professional solution for displaying marketing and sales documents online