02 Easy Operation Guide
1 Slowly pull the lock lever of the Tool Holder toward you to unlock it.
Unlock
Lock Lever
2 Align the rib of the tool (Auto Blade) with the notch of the Tool Holder and insert it firmly.
Align with the notch
Tool (Auto Blade) Tool Holder
Rib
Set it all the way so that there is no gap between the media and the top of the Tool Holder.
Tool (Auto Blade)
Tool Holder
Note When inserting the Auto Blade, hold the lock lever so that it is supported from the bottom, and insert the Auto Blade until the very bottom. Note that inserting the tool without holding the Tool Holder may damage the blade.
3
Lock the lock lever back.
Lock
Lock Lever
Additional information
Insert the tool all the way and then lock it. If it is not inserted all the way, the media may not be cut properly.
4 After setting the tool, Silhouette CAMEO5 recognizes the tool and automatically displays the tool in the "SEND" tab of Silhouette Studio.
47
Made with FlippingBook - professional solution for displaying marketing and sales documents online