03 About the Silhouette Studio Screen
SEND tab
Cutting conditions Action Tool
4 Specify an action such as "Cut" or "Sketch" from the Action pull-down list.
5
Specify the tool to use in the Tool pull-down list.
6 If you want to manually set the cutting conditions, set the blade depth, speed, force, and passes. First, set the speed to slow and the force to low, and if it is not enough, gradually increase the setting.
Passes setting Speed (cutting speed) setting Force setting
Blade Depth setting
(1) Blade Depth : Automatically protrudes the blade by the amount specified at the time of cutting. (Only for Auto Blade) Adjust the blade depth so that the blade protrudes slightly more than the media to be cut. (2) Speed : Set the cutting speed. Reduce the speed when cutting fine or complex designs or thick media. (3) Force : Set the force according to the thickness of the media to be cut. (4) Passes : Set the number of times to cut the design. Increase the number of passes when cutting thick or hard media.
59
Made with FlippingBook - professional solution for displaying marketing and sales documents online