04 Troubleshooting
04 Troubleshooting
This chapter describes what to do if problems occur with Silhouette CAMEO5. 4-1 Unable to load the media properly If the media cannot be loaded properly, check the following causes and solutions.
The media does not enter properly, and they bend and warp
If you are using rolled media, does the leading end tend to curl itself? • If the leading end of the media tends to curl itself, it may be loaded with the media being warped, or the media may not enter properly into the machine, which may cause the machine to be idle. Straighten the curled section and load it straight. If the media cannot be loaded properly, paste them on the cutting mat before loading. • When loading the media, pull the media taut on the left and right sides with both hands to set. • Move and set the Auxiliary Roller(s) onto the position where the media warp. For details, refer to "2-1 Cutting with an Auto Blade".
63
Made with FlippingBook - professional solution for displaying marketing and sales documents online