Wave Radius Mill RSE S eries
Exotic Alloy
Stainless Steel
¢ Features
D High-efficiency / high-rigidity radius cutter Wide insert seat surface design is capable of high-efficiency machining of materials such as stainless steel. The wide contact area promotes excellent durability which makes the RSE cutter ideal for aerospace applications like turbine blade roughing. D Lineup of ground type and M class inserts In addition to ground type 4-cornered inserts, the lineup includes
highly economical M Class 8-cornered inserts. D Uses new grades for exotic alloy machining
The newly developed ACS2500 and ACS3000 grades are used for stable and long tool life when machining exotic alloys such as titanium alloys, Ni-based heat-resistant alloys and stainless steel. ¢ Optimized connection surface design allows for the same body to be used with multiple inserts
¢ High-rigidity clamp design Wide Insert Seat Surface Design
4-cornered RPHT Installed
8-cornered RPMT/RDMT Installed
Ground 4-cornered insert and M Class 8-cornered insert can be used on the same body Connection Surface Connection Surface
¢ Product Range
Number in DD shows the number of teeth
Inch Arbor Inch Arbor
Max. Diameter ( mm ) ø25 ø32 ø40 ø42 ø50 ø52 ø63 ø80
Type
Product Code
RSE10000RS SS RSE12000RS SS RSE12000R SS Inch Arbor
5 4
6
Shell
8 8
4 5 6 5
6
RSE10000E SS
Shank
2 3 3 4
¢ Ramping / Helical Milling Upper Limit
Ramping
Helical Milling
Precautions for Helical Milling D Above the max. machining diameter, the center uncut portion removed by traverse cutting with the same cutter. D Below the minimum machining diameter, the center uncut portion cannot be removed with the same cutter.
Pitch
Pitch
ap
RMPX
DCX
DCX Work Diameter
DCX
Work Diameter
Max Diameter
Ramping
Helical Milling
Insert Cat No.
Max. Ramping Angle RMPX (°)
Max. Machining Dia.
Standard Diameter
Min Machining Diameter
DCX ( mm )
Max Pitch
Max Pitch
Max Pitch
4.6 2.8 1.9 1.3 3.4 3.1 2.3 2.2 1.6 1.1
1.913 2.465 3.094 3.882 3.094 3.252 3.882 4.039 4.906 6.244
0.189 0.181 0.154 0.134 0.236 0.236 0.236 0.236 0.209 0.189
1.598 2.150 2.780 3.567 2.701 2.858 3.488 3.646 4.512 5.850
0.130 0.114 0.102 0.098 0.177 0.173 0.161 0.161 0.154 0.146
1.429 1.980 2.610 3.398 2.457 2.614 3.244 3.402 4.268 5.606
0.055 0.055 0.055 0.055 0.063 0.063 0.063 0.063 0.063 0.063
ø25 ø32 ø40 ø50 ø40 ø42 ø50 ø52 ø63 ø80
R SS T10…
R SS T12…
2
Made with FlippingBook flipbook maker