with open clamping arm and horizontal base. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 5, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, galvanized clamping screw no. 6890. No. 6830 Horizontal acting toggle clamp
F1 [kN] 0,25
F2 [kN]
Clamping screw
Weight [g]
Size
Order no. 93005 93013 93021 93039 93047 93054
0,4 1,1 1,2 2,5 3,0 5,0
M4x25 M5x30 M6x35 M8x45 M8x65 M8x65
35
0 1 2 3 4 5
0,8 1,0 1,8 2,0 3,0
105 185 320 700
1080
Also available in „STAINLESS STEEL“ version (no. 6830NI) and in matte-black version (no. 6830B)!
Note: For suitable sensor monitor for size 3 see no. 6897S.
Size 0
Size 1
Size 2, 3, 4
Size 5
Dimensions: Order no. Size
A B
C D D1 E F H H1 H2 HW min. HW max. I
K L L1
M M1 N P
ǭ
4 28 11,5-15,5 4,6 -
9,0 5,5 14,5 23,0 34 -5,5
0,0
7,5 6,3 -
79 16,0
-
25,0 25,5 90° 34,0 34,0 90°
93005 0 93013 1 93021 2 93039 3 93047 4 93054 5
5 42 13,0-14,5 5,2 - 18,7 8,0 19,0 30,0 49 -3,0 6 64 26,0 5,6 5,6 32,0 16,0 24,0 45,0 68 -1,5 8 73 25,7 6,5 5,1 38,0 14,0 32,0 48,5 86 -2,0 10 113 41,0 8,5 8,5 63,0 27,0 45,0 75,0 126 -4,0 10 123 41,5 8,5 - 78,0 16,0 46,0 73,0 128 +1,7
2,5 10,0 5,5 -
120 18,0-21,5 -
5,0 13,2 6,0 12,7 162 19,5-29,5 28,5 42,0 38,0 90° 9,0 15,0 7,0 13,0 206 22,0-31,8 31,6 45,5 50,0 90° 24,0 20,0 8,0 20,5 287 29,0-43,0 43,0 58,0 57,0 90°
25,0 25,0 12,5 -
321 41,5
-
58,0 77,0 90°
anfrage@raeder-busch.de Tel.: +49/02151-93199-0 Fax: +49/02151-93199-93
11. 2 11.2
Tel.: +49 (0) 2151 93 199 0
Fax: +49 (0) 2151 93 199 93
Made with FlippingBook - Online Brochure Maker