with open clamping arm and angle base. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, galvanized clamping screw no. 6890. No. 6833 Horizontal acting toggle clamp
F1 [kN]
F2 [kN]
Clamping screw
Weight [g]
Size
Order no. 93179 93328 93336 93542
0,8 1,0 1,8 2,0
1,1 1,2 2,5 3,0
M5x30 M6x35 M8x45 M8x65
170 245 390 730
1 2 3 4
Dimensions: Order no. Size
A B C D E
F
H H1
H2 HW min.
HW max.
I
K L1
M N P
ǭ
5,0 32 13,5 5,2 18,5 4,0 57 68,0 49 6,2 52 20,0 5,6 32,0 10,5 73 94,0 68 8,0 59 24,0 6,8 37,0 6,5 70 86,5 86 10,0 93 32,0 8,5 63,0 15,0 102 133,0 120
14 22
20,0 29,5 16,0 40,0
10,0 8 120 19,0 31,0 28 90° 13,2 6 162 25,5 37,0 32 90° 15,0 7 206 28,5 42,5 38 90° 20,0 40 282 32,0 52,0 82 90°
93179 1 93328 2 93336 3 93542 4
5
11
anfrage@raeder-busch.de Tel.: +49/02151-93199-0 Fax: +49/02151-93199-93
11.4
11.4
Tel.: +49 (0) 2151 93 199 0
Fax: +49 (0) 2151 93 199 93
Made with FlippingBook - Online Brochure Maker