No. 6800 Vertical acting toggle clamp with open clamping arm and horizontal base. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection, lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, galvanized clamping screw no. 6890.
F1 [kN]
F2 [kN]
Clamping screw
Weight [g]
Size
Order no. 90001 90019 90027 90035 90043 90050 90068
0,5 0,6 0,8 1,2 1,7 3,0 3,4
0,7 1,1 1,2 2,5 3,0 5,0 5,5
M 4x 25 M 5x 30 M 6x 35 M 8x 45 M 8x 65 M12x 80 M12x110
60
0 1 2 3 4 5 6
105 175 410 630
1480 2200
Also available in „STAINLESS STEEL“ version (no. 6800NI) and in matte-black version (no. 6800B)!
Size 0
Size 1
Size 2
Size 3, 4
Size 5
Size 6
Dimensions: Order no. Size
A B
C D E F H H1 HW min. HW max. I K
L
L1 L2
M M1 N P
ǭ ǭdž
4 31,0 8,5-13,5 4,5 14 5,5 18,0 81,0 -1,5 5 39,0 16,0 4,5 18 6,0 19,0 98,5 -4,0 6 52,0 20,0 5,5 25 11,0 23,0 139,5 -3,0 8 79,0 20,0 7,5 37 19,0 33,0 186,0 2,0 10 101,0 32,0 8,6 54 16,0 42,5 221,0 -6,0 14 140,0 45,0 8,5 73 34,0 55,8 281,0 -3,0 14 165,5 50,5 13,0 89 28,0 81,0 333,0 -2,5
3,5
8 5,5
- - - -
49 50 23,0 61 59 22,5-26,0 - - 112 112 32,5 141 130 43,5-46,5 - -
32 22 95° 35 27 95°
- -
90001 0 90019 1 90027 2 90035 3 90043 4 90050 5 90068 6
2,0 10 5,5
4,5 12 6,0 12,5 78 89 23,0-31,0 27 43 32 105° 60°
11,0 18 7,5 22,5 20 13,0
46 35 105° 60° 64 53 105° 60°
27,5 25 9,5 26,5-31,5 195 185 45,0-50,0 45 70 65 115° 60°
55,0 30 24,5
-
231 206 67,5-72,5 - 100 90 140° 60°
* The opening angle can be changed by pressing in a stop pin.
anfrage@raeder-busch.de Tel.: +49/02151-93199-0 Fax: +49/02151-93199-93
11.8
11. 8
Tel.: +49 (0) 2151 93 199 0
Fax: +49 (0) 2151 93 199 93
Made with FlippingBook - Online Brochure Maker