No. 6812P Heavy vertical toggle clamp
F1 [kN] 10,0 12,0 20,0 2,5
Clamping screw
Weight [g]
Size
Order no. 91330 90902 90910 90928
with vertical base and mounting holes. Reamed and case-hardened bearing bushes. Hardened, ground and permanently-lubricated pins. Clamp nuts on lever arm to vary friction in movement. Material: steel, blued. Lever arm made of cast steel, blued. Handle of red, oil-resistant plastic. Complete with tempered, galvanized clamping screw no. 6885.
M 6x 50 M12x 80 M12x110 M12x110
320 1320 2120 4060
2 4 6 8
Note: These heavy vertical toggle clamps are especially suitable for production equipment and fixtures.
Size 2
only at size 2
Dimensions: Order no. Size
A B C D D1 E F
H H1 H2 H3 HW min. HW max.
I
K L1 L2 N O P
ǭ
6,2 48 -
-
-
30 12 42,0 144 -
-
3,5 -1,0 0,0
22,8 15 -
85 94 31 6 37 190°
91330 2 90902 4 90910 6 90928 8
12,2 101 30 8,5 5,7 - 12,2 121 45 10,5 7,7 - 12,2 151 55 12,5 9,7 -
75 62,0 233 10 25 95 87,5 289 15 35
35,0 24 15 146 161 52 10 60 120° 58,0 30 15 181 189 60 12 75 120° 76,0 36 20 226 219 76 16 95 120°
120 106,0 338 15 40 25,0
anfrage@raeder-busch.de Tel.: +49/02151-93199-0 Fax: +49/02151-93199-93
11.14
11. 14
Tel.: +49 (0) 2151 93 199 0
Fax: +49 (0) 2151 93 199 93
Made with FlippingBook - Online Brochure Maker