Stage Catalogue

No. 6841 Push-pull type toggle clamp

F1 [kN]

F2 [kN]

Clamping screw

Weight [g]

Size

Order no. 94094 94110 94128 94136 94151

with small angle base. For push- and pull-clamping. (Equal operation of rod and lever). Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components. Complete with tempered, galvanized clamping screw no. 6880.

0,8 1,0 2,0 2,5 4,5 4,5

0,8 1,0 2,0 2,5 4,5 4,5

M 4x20 M 4x20 M 6x25 M 8x35 M12x50 M12x50

65

0 1 2 3 5

125 245 445 880 900

94367 5-M27

Also available in „STAINLESS STEEL“ version (no. 6841NI) and in matte-black version (no. 6841B)!

Stroke

Dimensions: Order no. Size

A B min. B max.

D E H H1 Stroke HW min. HW max.

K L1 L2 L3

M

M2

N P

6,5 17,0 33,0 4,5 13 12 49,3 16 8,0 24,5 44,5 4,5 20 15 60,5 20 10,0 32,5 58,5 5,6 20 20 85,5 26 12,0 37,0 69,0 6,5 30 25 108,0 32 16,0 41,5 81,5 8,5 50 30 129,5 40

12 12 17 22 30 30

20 20 25 35 50 50

6,5 66,5 10 54,0

16,0 M10x1,0 25 16

94094 0 94110 1 94128 2 94136 3 94151 5

7,0 91,0 16 74,0 16,0-19,5 M12x1,5 30 20 12,5 114,0 19 105,0 31,8-36,0 M16x1,5 50 34 13,0 140,0 22 127,5 29,5-42,5 M20x1,5 60 30 15,5 171,5 25 158,0 29,0-46,0 M24x1,5 65 35 15,5 171,5 25 158,0 29,0-46,0 M27x2,0 65 35

94367 5-M27 16,0 41,5 81,5 8,5 50 30 129,5 40

Fax: +49 (0) 2151 93 199 93 anfrage@raeder-busch.de Tel.: +49/02151-93199-0 Fax: +49/02151-93199-93

11.18

11.18

Tel.: +49 (0) 2151 93 199 0

Made with FlippingBook - Online Brochure Maker