User manual and installation instructions HBS534B.0B | Bosch

Time-setting options en

▶ Use the or button to change the timer duration. a The appliance applies the change after a few seconds. Cancelling the timer You can cancel the timer duration at any time. Requirement: is highlighted on the display. ▶ Use the button to reset the timer duration to zero. a After a few seconds, the appliance applies the change and goes out. 9.3 Setting the cooking time You can set a cooking time for operation of up to 23 hours 59 minutes. Requirement: The type of heating and temperature or setting are set. 1. Press the button repeatedly until is highlighted in the display. 2. Use the or button to set the cooking time. Button Default value 10 minutes 30 minutes The cooking time can be set in 1-minute increments up to 1 hour, and then in 5-minute increments. a The appliance starts heating and the cooking time counts down after a few seconds. a If the cooking time has elapsed, an audible signal sounds and the display shows the cooking time as zero. 3. When the cooking time has elapsed: ‒ Press any button to end the audible signal before it sounds. ‒ To set a cooking time again, press the button. ‒ When your food is ready, switch off the appli- ance. Changing the cooking time You can change the cooking time at any time. Requirement: is highlighted on the display. ▶ Change the cooking time using the or button. a The appliance applies the change after a few seconds. Cancelling the cooking time You can cancel the cooking time at any time. Requirement: is highlighted on the display. ▶ Reset the cooking time to zero using the button. a After a few seconds, the appliance applies the change and continues to heat without a cooking time. 9.4 Setting the end time You can delay the time at which cooking is due to fin- ish by up to 23 hours and 59 minutes. Notes ¡ The end time cannot be set for types of heating with grill function. ¡ In order to achieve a good cooking result, do not delay the end time once the appliance is already in operation.

¡ Food will spoil if you leave it in the cooking com- partment too long. Requirements ¡ The type of heating and temperature or setting are set. ¡ A cooking time is set. 1. Press the button repeatedly until is highlighted in the display. 2. Press the or button. a The display shows the calculated end time. 3. Use the or button to delay the end time. a After a few seconds, the appliance applies the set- ting and the display shows the set end time. a Once the calculated start time has been reached, the appliance starts heating up and the cooking time starts counting down. a Once the time has elapsed, an audible signal sounds and the display shows the cooking time as zero. 4. When the cooking time has elapsed: ‒ Press any button to end the signal prematurely. ‒ To set another cooking time, press the button. ‒ When your food is ready, switch off the appli- ance. Changing the end time In order to achieve a good cooking result, you can only change the set end time before operation starts and the cooking time starts counting down. Requirement: is highlighted on the display. ▶ Use the or button to delay the end time. a The appliance applies the change after a few seconds. Cancelling the end time You can delete the set end at any time. Requirement: is highlighted on the display. ▶ Reset the end time to the current time plus the set cooking time using the button. a After a few seconds, the appliance applies the change and starts heating up. The cooking time counts down. 9.5 Setting the time on the clock Once the appliance has been connected to the mains or following a power failure, the time flashes on the dis- play. The time starts at "12:00". Set the current time. Requirement: The function selector must be set to the "Off" position ⁠. 1. Use the or button to set the time. 2. Press the button. a The time that is set appears on the display. Changing the time on the clock You can change the time on the clock at any time. Requirement: The function selector must be set to the "Off" position ⁠. 1. Press and hold the button until the clock flashes on the display. 2. Use the or button to change the time. a The appliance applies the change after a few seconds.

11

Made with FlippingBook Online newsletter maker