Appliance door en
3. Clean the rail. → "Cleaning products", Page 12 13.2 Attaching the shelf supports Notes ¡ The rails only fit on the right or left. ¡ For both rails, ensure that the curved rods are at the front. 1. First, push the rail into the middle of the rear socket until the rail rests against the cooking compartment wall, and then push this back . 14 Appliance door To ensure that your appliance retains its appearance and remains fully functioning for a long time, you can detach the appliance door and clean it. 14.1 Detaching the appliance door WARNING ‒ Risk of injury! Components inside the appliance door may have sharp edges. ▶ Wear protective gloves. The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. ▶ Keep your hands away from the hinges. 1. Open the appliance door fully.
2. Push the rail into the front socket until the rail also rests against the cooking compartment wall, and then press this downwards .
2.
WARNING ‒ Risk of injury! When the hinges are not secured, they can snap shut with great force. ▶ Make sure that the locking levers are always either fully closed or (when detaching the oven door) fully open. Open the locking levers on the left- and right-hand hinges. Locking levers opened
The hinge is now se- cured and cannot snap shut.
Locking levers closed
The appliance door is secured and cannot be detached. a The locking levers are open. The hinges are now se- cured and cannot snap shut.
15
Made with FlippingBook Online newsletter maker