en Installation instructions
19.3 Installation below a worktop Observe the installation dimensions and the installation instructions when installing below a worktop.
¡ Wear protective gloves so that you do not cut yourself. Parts that are accessible dur- ing installation may have sharp edges. ¡ Dimensions of the figures in mm. WARNING ‒ Risk of fire! It is dangerous to use an extended power ▶ Only use extension cables that are certified, have a minimum cross section of 1.5 mm² and comply with the applicable national safety requirements. ▶ If the power cord is too short, contact cus- tomer service. ▶ Only use adapters approved by the manu- facturer. ATTENTION! Carrying the appliance by the door handle could break it. The door handle cannot sup- port the weight of the appliance. ▶ Do not carry or hold the appliance by the door handle. 19.2 Appliance dimensions You will find the dimensions of the appliance here cord and non-approved adapters. ▶ Do not use multiple socket strips.
¡ To ventilate the appliance, the intermediate floor must have a ventilation cut-out. ¡ In combination with induction hobs, the gap between the worktop and appliance must not be sealed using additional strips. ¡ The worktop must be secured to the built-in unit. ¡ Observe any available installation instructions for the hob. 19.4 Installation in a tall unit Observe the installation dimensions and the installation instructions when installing in a tall unit.
¡ To ventilate the appliance, the intermediate floors must have a ventilation cut-out. ¡ If the tall unit has another back panel in addition to the element back panels, this must be removed. ¡ Only fit the appliance up to a height which allows accessories to be easily removed.
24
Made with FlippingBook Online newsletter maker