Installation instructions en
19.5 Installing two appliances on top of each other Your appliance can also be installed above or below another appliance. Observe the installation dimensions and the installation instructions when installing appli- ances on top of each other.
¡ To ensure that the appliance door can be opened, you must take the minimum dimensions into consid- eration when installing in a corner. The dimension is dependent on the thickness of the unit front and the handle. 19.7 Electrical connection In order to safely connect the appliance to the elec- trical system, follow these instructions. ¡ The appliance corresponds to protection class I and must only be operated with a protective earth con- nection. ¡ The fuse protection must correspond to the power rating specified on the appliance's rating plate and to local regulations. ¡ The appliance must be disconnected from the power supply whenever installation work is being carried out. ¡ The appliance must only be connected using the power cable provided. ¡ The power cable must be plugged in at the rear of the appliance until you hear a clicking sound. A 3 m power cable can be obtained from the after-sales service. ¡ The power cable must only be replaced with a cable from the original manufacturer. This is available from after-sales service. ¡ Contact protection must be guaranteed by the in- stallation. Electrically connect the appliance with the protective contact plug Note: The appliance must only be connected to a pro- tective contact socket that has been correctly installed. ▶ Insert the plug into the protective contact socket. When the appliance is installed, the mains plug of the power cord must be freely accessible. If free ac- cess to the mains plug is impossible, an all-pole isolating switch must be integrated into the perman- ent electrical installation in accordance with the in- stallation regulations. Electrically connecting an appliance without a protective contact plug Note: Only a licensed professional may connect the ap- pliance. Damage caused by incorrect connection is not covered under the warranty. An all-pole isolating switch must be integrated into the permanent electrical installation according to the install- ation regulations. 1. Identify the phase and neutral conductors in the socket. The appliance may be damaged if it is not connec- ted correctly. 2. Connect the hob in accordance with the connection diagram. See the rating plate for the voltage. 3. Connect the wires of the mains power cable accord- ing to the colour coding: ‒ Green/yellow = Protective conductor ‒ Blue = Neutral conductor ‒ Brown = Phase (external conductor)
¡ To ventilate the appliances, the intermediate floor must have a ventilation cut-out. ¡ To ensure sufficient ventilation of the two appli- ances, there must be a ventilation opening of at least 200 cm² in the base area. To do this, trim the base panel or fit a ventilation grille. ¡ Ensure that air exchange is guaranteed in accord- ance with the diagram.
¡ Only fit appliances up to a height that allows ac- cessories to be easily removed. 19.6 Corner installation Observe the installation dimensions and the installation instructions when installing in a corner.
25
Made with FlippingBook Online newsletter maker