en Installation instructions
19.8 Installing the appliance 1. Slide the appliance in fully and centre it.
2. Screw the appliance into place.
3. For handleless kitchens with vertical bar handle strips:
‒ Attach a suitable filling piece in order to cover any sharp edges and to guarantee a safe install- ation. ‒ Pre-drill aluminium profiles to establish a screw connection . ‒ Secure the appliance using a suitable screw .
Note: The gap between the worktop and the appliance must not be closed by additional battens. Thermal insulation strips must not be fitted to the side panels of the surround unit. 19.9 Removing the appliance 1. Disconnect the appliance from the power supply. 2. Undo the fastening screws. 3. Lift the appliance slightly and pull it out completely.
26
Made with FlippingBook Online newsletter maker