Materialise HeartPrint Catalogue

Materialise HeartPrint

3 D Printing Services for Cardiovascular Anatomy

1

Select a category or browse the catalog to see the HeartPrint Research models

Cardiac Models

CHD Models

Valve Models

Vascular Models

2

Cardiac Models

3

CHD Models

4

Valve Models

5

Vascular Models

http://www.materialise.com/

6

Cardiac Models

7

Hypertrophic Heart with Valve Calcifications

Application Examples

• R&D valve deployment testing • Physician training demo model

Patient & Pathology

• 73y, female • Ventricular hypertrophy, heavily calcified aortic and mitral valve • 0.3 mm slice increment CTA

3D-Printed Characteristics

• Cardiovasular tissue printed in Materialise HeartPrint Flex • Calcifications printed in rigid material • Full heart cut in LA, RA/RV for visualization, cuts customizable • Right heart side smoothed • LV papillary muscles present, no chordae tendinae, no valve leaflets • Size: 11 x 13 x 17 cm

Request a quote

CAR-001

8

Heart with Atrial Cut, Smooth Right Side

Application Examples

• R&D mitral or tricuspid valve device deployment testing • Heart anatomy education • Atrial appendage closure testing and training

Patient & Pathology

• 55y, male • Calcified left and right coronaries • IVC venous thrombosis • 0.63 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex • Detailed left heart with main papillaries, muscle trabeculations and mitral valve orifice • Right heart side smoothed out, tricuspid valve annulus present • Atrial appendages present • Images show cut through LA and RA, cut location customizable • Coronaries present, not hollow • Size: 11 x 11 x 11 cm

Request a quote

CAR-002

9

Heart with Detailed Chambers and Valve

Application Examples

• R&D valve deployment testing • Physician training demo model

Patient & Pathology

• 79y, female • Ventricular hypertrophy, heavily calcified aortic and mitral valve • 0.3 mm slice increment CTA

3D-Printed Characteristics

• Cardiovasular tissue printed in Materialise HeartPrint Flex • Calcifications printed in rigid material • Full heart cut in LA, RA/RV for visualization, cuts customizable • Right heart side smoothed • LV papillary muscles present, no chordae tendinae, no valve leaflets • Size: 11 x 13 x 17 cm

Request a quote

CAR-003

10

Full Transparent Heart with Muscle

Application Examples

• Marketing • Gift model

Patient & Pathology

• 76y, male • Coronary calcification • 0.63 mm slice increment CTA

3D-Printed Characteristics

• PolyJet, tissue in transparent rigid material, blood in white rigid material • Calcifications virtually removed • LV trabeculations and papillary muscles • Materialise logo, any logo possible • Scaled to 70%, custom scaling possible • Multiple patient data sets available • Size: 15 x 13 x 9.5 cm

Request a quote

CAR-004

11

Transparent Heart

Application Examples

• Marketing • Gift model • Anatomical training

Patient & Pathology

• 76y, male • Coronary calcification • 0.63 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Full heart model with hollow chambers • Valve annuli present • Calcifications virtually removed • Materialise logo, any logo possible • 70% scaled version available as well as custom scaled • Multiple patient data sets available • Size: 19 x 18 x 13 cm

Request a quote

CAR-006

12

Transparent Heart with Pedestal

Application Examples

• R&D catheter motion testing • Septum crossing training • Marketing/training kit

Patient & Pathology

• 76y, male • Coronary calcifications • 0.63 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Pedestal in selective laser sintering • Full heart model with hollow chambers • Valve annuli present • Calcifications virtually removed • Materialise logo, any logo possible • Size: 36 x 19 x 12 cm

Request a quote

CAR-007

13

Left Coronary Model

Application Examples

• R&D stent deployment testing • Guide wire physician training • Device training/demo

Patient & Pathology

• 55y, male • IVC venous thrombosis with IVC filter (outside the image range) • 0.63 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex • Patent coronary arteries

• Left main, LAD and main diagonal branches • Translucent to visualize device deployment • Multiple patient data sets available • Size: 11 x 5 x 4.5 cm

Request a quote

C0R-010

14

Atrial Septal Defect

Application Examples

• ASD closure training • Device deployment testing • Closure device sales rep demo kit • Patient communication

Patient & Pathology

• 15y, female • Atrial septal defect • 0.63 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex • ASD support ring for increased durability • Visualization cuts through LV, RV and RA, cuts customizable • Size: 10.5 x 9.3 x 11.3 cm

Request a quote

CAR-022

15

Patent Foramen Ovale

Application Examples

• PFO closure training • Device deployment testing • Closure device sales rep demo kit

• Ablation/LAA training • Patient communication

Patient & Pathology

• 15y, female • Patent foramen ovale • 0.63 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex • PFO ring for increased durability • Visualization cuts through LV, RV and RA, cuts customizable • Size: 10.5 x 9.3 x 11.3 cm

Request a quote

CAR-023

16

Atrial Septal Crossing

Application Examples

• Atrial septal crossing training • Device deployment testing • Closure device sales rep demo kit

• Ablation/LAA training • Patient communication

Patient & Pathology

• 15y, female • Atrial fibrillation • 0.625 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex • Colored LAA • Reinforced septal crossing location • Size: 10.47 x 9.33 x 11.34 cm • Visualization cuts through LV, RV and RA, cuts customizable

Request a quote

CAR-024

17

Heart with Coronaries

Application Examples

• Coronary stent training and marketing • R&D catheter motion testing • Heart anatomy education • Physician training demo model

Patient & Pathology

• 79y, female • Coronary and aortic valve calcifications • 0.3 mm slice increment CTA

3D-Printed Characteristics

• High-end transparant stereolithography • Hollow, cosmetic transparant coronaries • Right and left ventricle trabeculations and main papillary muscles • Size: 7.4 x 6.2 x 9.3 cm • Visualization cuts in the ventricles, cuts customizable

Request a quote

CAR-026

18

Heart Tumor

Application Examples

• Pathology training and education • Patient communication

Patient & Pathology

• 16y, male • Left Ventricular Outflow Tract Tumor • 0.25 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex • Rigid material for tumor • Right and left ventricle trabeculations and main papillary muscles • Scaled, Size: 10.4 x 7.9 x 10.2 cm • Visualization cuts to create 4 chamber view, cuts customizable

Request a quote

CAR-034

19

CHD Models

20

L-TGA with Sub PS and VSD

Application Examples

• Pathology training • Congenital heart defects education • Patient communication

Patient & Pathology

• 34y, female • Levo transposition of great arteries, sub pulmonary valve stenosis and ventricular septal defect • 1.2 mm slice increment cardiac MRI

3D-Printed Characteristics

• Materialise HeartPrint Flex • Full heart cut in 2 parts for visualization • Pulmonary valve calcifications optional

• Custom cuts possible • Size: 18 x 11 x 8.5 cm

Request a quote

CHD-009

21

Double Outlet Right Ventricle

Application Examples

• Pathology training • Congenital heart defects education • Patient communication

Patient & Pathology

• 1y, male • Double outlet right ventricle with ventricular septal defect • 0.3 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex • Right and left ventricle trabeculations and main papillary muscles • Visualization cuts through LV, RV and RA, cuts customizable LAA present • Size: 8.8 x 5.4 x 8.9 cm

Request a quote

CHD-020

22

Double Outlet Right Ventricle

Application Examples

• Pathology training • Congenital heart defects education • Patient communication

Patient & Pathology

• 1y, female • Double outlet right ventricle with ventricular and atrial septal defect • 1.3 mm slice increment MRA

3D-Printed Characteristics

• Materialise HeartPrint Flex • Right and left ventricle trabeculations and main papillary muscles • Visualization cuts in the ventricles, cuts customizable • Size: 7.5 x 6.2 x 9.3 cm

Request a quote

CHD-025

23

Valve Models

24

Left Heart with Valve Leaflets

Application Examples

• Physician training demo model • R&D valve device deployment testing • Calcification movement studies

Patient & Pathology

• 71y, male • Aortic and mitral valve calcifications • 0.63 mm slice increment

3D-Printed Characteristics

• Materialise HeartPrint Flex for the cardiac tissue • Calcifications printed in rigid white material • Aortic and mitral valve leaflets present • Detailed left ventricle with main papillaries and muscle trabeculations

• Materialise logo, any logo possible • Multiple patient data sets available • Size: 11 x 12 x 12 cm

Request a quote

VAL-008

25

Calcified Aortic Valve incl. Mitral Valve Orifice

Application Examples

• TAVI R&D • Anatomy education

Patient & Pathology

• 82y, female • Severely calcified aortic valve • 0.63 mm slice increment CTA

3D-Printed Characteristics

• Cardiovascular tissue printed in Materialise HeartPrint Flex • Calcifications printed in rigid white material

• Aortic valve, mitral valve orifice • Materialise logo, any logo possible • Main LV papillary muscles • LV muscle smoothed • Size: 9 x 8 x 6 cm

Request a quote

VAL-011

26

Calcified Aortic Valve

Application Examples

• Patient communication • Marketing gift models • Anatomy education

Patient & Pathology

• 82y, female • Severely calcified aortic valve • 0.63 mm slice increment CTA

3D-Printed Characteristics

• Cardiovasular tissue printed in Materialise HeartPrint Flex • Calcifications printed in rigid white material • Aortic root and valve leaflets

• Materialise logo, any logo possible • 3D printed fit container optional • Multiple patient data sets available • Size: 7 x 3.5 x 3 cm

Request a quote

VAL-012

27

Calcified Aortic Valve (with Deployed TAVI Device)

Application Examples

• TAVI R&D device deployment testing • Calcification movement studies

Patient & Pathology

• 82y, female • Severely calcified aortic valve • 0.63 mm slice increment CTA

3D-Printed Characteristics

• Cardiovascular tissue printed in Materialise HeartPrint Flex • Calcifications printed in rigid white material • Aortic root and valve leaflets • Materialise logo, any logo possible • Family of models available • Valve stent frame not included • Multiple patient data sets available • Size: 7 x 4 x 4 cm

Request a quote

VAL-014

28

Bicuspid Calcified Aortic Valve

Application Examples

• Patient communication • Physician training demo model • R&D valve device deployment testing

Patient & Pathology

• 73y, female • Severely calcified bicuspid aortic valve • 0.5 mm slice increment

3D-Printed Characteristics

• Cardiovascular tissue printed in Materialise HeartPrint Flex • Calcifications printed in rigid white material • Aortic root and valve leaflets • Materialise logo, any logo possible • Size: 7 x 7 x 13 cm

Request a quote

VAL-019

29

Right Ventricular Outflow Tract

Application Examples

• R&D device deployment testing • Pulmonary valve replacement training/ demo • Pathology training • Patient communication

Patient & Pathology

• 31y, female • Pulmonary insufficiency, pulmonary val- vestenosis 0.63 mm slice increment CTA • 0.682 mm increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Model of RVOT and pulmonary artery • Multiple patient data sets available • Size: 7.1 x 9.8 x 7.1 cm

Request a quote

VAL-021

30

Percutaneous Pulmonary Valve Implantation

Application Examples

• R&D pulmonary valve device deployment • Catheter motion testing and training • PPVI education and training

Patient & Pathology

• 21y, female • Complex congenital heart disease history • Pulmonary valve degeneration, stents al- ready in place • 0.54 mm slice increment CTA

3D-Printed Characteristics

• Materialise HeartPrint Flex, chambers in pink and blue • Semi-flexible coronary arteries in pink • Rigid stents in blue • Apex of the heart cut for visualization • Size: 11.5 x 9.98 x 11.7 cm

Request a quote

VAL-027

31

Vascular Models

32

Carotid model with Left Bifurcation Calcification

Application Examples

• R&D device deployment testing • Pulsatile flow analysis • Physician training demo model

Patient & Pathology

• 39y, female • Left carotid bifurcation calcification • 0.6 mm slice increment CT

3D-Printed Characteristics

• Vascular tissue printed in Materialise HeartPrint Flex • Calcification printed in rigid white material • Aortic arch, brachiocephalic, right and left common carotid • Left carotid bifurcation calcification

• Patent right carotid • Size: 22 x 7.5 x 6 cm

Request a quote

VAS-016

33

Transparent AAA without Baseplate

Application Examples

• Device bench top testing • Fluid flow analysis

Patient & Pathology

• 65y, male • Abdominal Aortic Aneurysm (AAA) • 1.3 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Suprea-renal to femoral artery model • Subrenal aorto-iliac abdominal aneurysm • Flange CAD component for pump connecti- on • All visible vessels open • Multiple patient data sets available • Size: 28 x 18 x 12 cm

Request a quote

VAS-017

34

Transparent AAA with Baseplate

Application Examples

• Device bench top testing • Fluid flow analysis

Patient & Pathology

• 65y, male • Abdominal Aortic Aneurysm (AAA) • 1.3 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Suprea-renal to femoral artery model • Subrenal aorto-iliac abdominal aneurysm • Flange CAD component for pump connection • Base plate added for mounting in bench setup • Scaled 90%, scaling optional • All visible vessels open • Multiple patient data sets available • Size: 28 x 21 x 12 cm

Request a quote

VAS-018

35

Aortic Arch Aneurysm

Application Examples

• Physician training demo model • Device bench top testing • Catheter motion testing and training

Patient & Pathology

• 72y, male • Aortic arch aneurysm • 0.8 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Aortic root to femoral artery model • Base plate for bench setup (optional)

• All visible vessels open • Size: 21 x 15.3 x 54.2 cm

Request a quote

VAS-028

36

Abdominal Aortic Aneurysm (AAA)

Application Examples

• Physician training demo model • Device bench top testing • Catheter motion testing and training

Patient & Pathology

• 65y, male • Abdominal Aortic Aneurysm (AAA) • 1.3 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Aortic root to femoral artery model • Subrenal aorto-iliac abdominal aneurysm • Base plate for bench setup (optional) • All visible vessels open • Multiple patient data sets available • Size: 20.3 x 11.2 x 55.4 cm

Request a quote

VAS-029

37

Thoracic-Abdominal Aortic Aneurysm

Application Examples

• Physician training demo model • Device bench top testing • Catheter motion testing and training

Patient & Pathology

• 55y, female • Thoracic-Abdominal Aortic Aneurysm • 1.25 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Aortic root to femoral artery model • Base plate for bench setup (optional)

• All visible vessels open • Size: 17.4 x 15 x 61.3 cm

Request a quote

VAS-030

38

Aorta

Application Examples

• Physician training demo model • Device benchtop testing • Catheter motion testing and training

Patient & Pathology

• 37y, male • Healthy • 0.625 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography • Aortic root to femoral artery model • Base plate with CT image • Femoral artery endings open • Size: 20.4 x 16.6 x 61.9 cm

Request a quote

VAS-031

39

Femoral Access and Closure

Application Examples

• Groin puncture training • Closure device demonstration and training

Patient & Pathology

• 80y, female • Calcified vessels • 3 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent stereolithography groin model • Suction cups for stable positioning • Flexible replaceable puncture piece • Realistic touch developed with experienced vascular surgeon • Rigid calcification (optional) • Size: 12 x 10.8 x 18 cm • Any logo possible

in cooperation with ID-3 Medical

Request a quote

VAS-032

40

Circle of Willis

Application Examples

• R&D catheter motion testing • Physician training demo model • Anatomical training

Patient & Pathology

• 80y, female • Cerebral aneurysm (outside model region) • 0.312 mm slice increment

3D-Printed Characteristics

• Transparent stereolithography • Neck vessels and circle of Willis • Size: 6.5 x 7.1x 6.3 cm

Request a quote

VAS-033

41

Aorta and heart – modular model

Application Examples

• Device bench top testing • Catheter motion testing and training • Physician training demo model

Patient & Pathology

• 37y, male • Healthy • 0.625 mm slice increment CTA

3D-Printed Characteristics

• High-end transparent Stereolithography • Flexible valves in HeartPrint® flex • Heart to femoral artery model • Modular model with valve annuli, valves and viewing windows • Size: 18.8 x 14 x 53.4 cm

Request a quote

VAS-034

42

Endovascular Simulator Model

Application Examples

• Physician training model • Catheter motion testing and training • Device benchtop testing

Patient & Pathology

• 37y, male • Healthy • 0.625 mm slice increment CTA

3D-Printed Characteristics

• Femoral artery model to aortic root • Transparent Stereolithography • Watertight • Designed to use with standard 6Fr sheath • Plexiglas baseplate with coronal CT image • 50 x 16 x 70 cm

Request a quote

VAS-035

43

Educational & Training Boxes

44

Customized Training Kit

Realistic training is important for product managers, technical sales teams, interventionists and medical students alike. Materialise has the capability to 3D print accurate, anatomical models that can be used to showcase devices or practice procedures. Our engineering services team is available to work with you to create the ideal custom simulation box for your needs. The boxes are constructed with holes in the side panels that access the anatomy in the most optimal way for your application. Your box can contain one or multiple 3D-printed models and be branded to promote your product or company. We can even print your company logo or other text directly on the models. This kit shows examples for pacemaker lead placement, coronary stenting, atrial fibrillation ablation with LAA occlusion and transapical TAVI. Whether your kit is intended for internal training or on-site demonstrations with physicians, the HeartPrint ® Research boxes ensure the most realistic, professional and mobile training experience.

Request a quote

45

Materialise HeartPrint

What is HeartPrint? HeartPrint is Materialise’s service for providing 3D-printed cardiovascular models from medical image data for research or clinical applications. Our HeartPrint models are listed as a medical device in the USA and the EU. How are HeartPrint models used? Our “HeartPrint Research” models are not intended for clinical use but are ideal for benchtop models, training, education and marketing. Our “HeartPrint” models are used to assist cardiovascular professionals to provide additional information on patient treatment. What material options are available? Materialise offers a large variety of the latest 3D printing technologies to meet your requirements. Our 3D-printed cardiovascular models come in (multi-)colors and (multi-) materials, ranging from rigid to flexible. Your model can be fully customized, here are a few examples: • color distinctions between chambers and vessels; tissue and blood • colored rings to indicate valve annuli, ASD and VSD • flexible models with calcifications and/or tumors printed inrigid material • custom cuts for optimal visualization • any logo or reference code We even have a proprietary 3D printing process called Materialise HeartPrint Flex that results in realistic, highly flexible models.

How does the HeartPrint service work? It’s easy! The models in our catalog can be ordered directly, adapted to your needs or based on your own data set. To order a model, please click on the ‘Request a quote’ button and provide us with the following information:

Standard models: Indicate the model reference code.

Standard models with custom features: Indicate the model reference code and the adaptations you require*. Patient-specific models: Upload the CT or MRI DICOM files via the link you will receive by email. Our engineering services team will follow up to discuss your requirements. Additional models: Request a consultation. We have an extensive medical image database we can access to find an ideal dataset for your needs. * Typical adaptations include: additional cuts, adding CAD components or flanges, branding models with a company logo, adding a septum hole and much more.

Request a quote

46

HeartPrint Workflow

Are you curious to know how a heart model is 3D printed? to see all the steps involved. Watch our movie

47

Our Technologies

Materialise HeartPrint Flex The Materialise HeartPrint Flex process combines flexible and rigid materials in one high- resolution, durable print. These realistic and accurate models distinguish between calcifications and surrounding cardiovascular anatomy. The process is available for research and clinical applications. Click here to read the white paper on the material characteristics of Materialise HeartPrint Flex.

Stereolithography Stereolithography machines use a liquid resin which is selectively cured by a computer controlled UV laser for highly accurate and transparent models. Our team ensures that your models are cleaned and post-processed expertly to provide the most transparent models avaialble.

PolyJet PolyJet machines combine a range of rigid, UV-curable materials for beautiful and accurate models that are ideal for training and marketing.

48

If a picture is worth a thousand words, a 3D-printed model is worth a thousand pictures!

49

About Materialise

Materialise is a global 3D printing software and services company whose medical division is dedicated to enabling researchers, engineers and clinicians to revolutionize patient-specific treatment that improves and saves lives. Our open and flexible platform, Materialise Mimics, forms the foundation of certified Medical 3D Printing and incorporates a comprehensive range of software solutions and 3D printing services. With over 25 years of excellence, we work alongside our customers in healthcare, automotive, aerospace, consumer goods, art and design, to build groundbreaking 3D printing applications that make the world a better and healthier place.

Please visit our website to learn more.

50

Copyright and Trademark Notice Materialise is the owner or licensee of all rights in this catalogue and its contents, software, databases and services. The materials contained in this catalogue are protected by the copyright and trademark laws and other laws of Belgium and other countries. No user of this catalogue has any right, title, or interest in such contents, software, databases or services not previously expressly granted in writing to such user by Materialise. No materials from this catalogue may be published, uploaded, downloaded, transmitted, posted, copied, reproduced, distributed or republished except with Materialise’s express written permission. Materialise, Mimics, 3-matic and HeartPrint are registered trademarks, service marks, and/or trade names owned by Materialise. These and all other trademarks, service marks, and trade names used in this catalogue are owned by Materialise or third parties, and are protected by national and/or international trademark laws. No user of the catalogue has any right, title, or interest in those marks or names not previously expressly granted in writing to such user by Materialise. Regulatory Information The Medical edition of the Materialise Mimics Innovation Suite currently consists of the following software components: Mimics Medical version 21.0 and 3-matic Medical version 13.0 (released 2018). Mimics Medical is intended for use as a software interface and image segmentation system for the transfer of imaging information from a medical scanner such as a CT scanner or a Magnetic Resonance Imaging scanner. It is also used as pre- operative software for simulating /evaluating surgical treatment options. 3-matic Medical is intended for use as software for computer assisted design and manufacturing of medical exo- and endo-prostheses, patient-specific medical and dental/orthodontic accessories and dental restorations. The Research edition of the Materialise Mimics Innovation Suite currently consists of the following software components: Mimics Research version 21.0 and 3-matic Research version 13.0 (released 2018). Mimics Research is intended only for research purposes. It is intended as a software interface and image segmentation system for the transfer of imaging information from a variety of imaging sources to an output file. It is also used as software for simulating, measuring and modeling in the field of biomedical research. “Mimics Research” must not be used, and is not intended to be used, for any medical purpose whatsoever. 3-matic Research is intended for use as a software for computer assisted design and engineering in the field of biomedical research. “3-matic Research” must not be used, and is not intended to be used, for the design or manufacturing of medical devices of any kind. HeartPrint Research models are not intended for medical use. Cleaning and sterilization can alter the material properties of HeartPrint medical and HeartPrint Research models and is not recommended. Materialise Belgium – Technologielaan 15 – 3001 Leuven – Belgium

0120 © 2018 Materialise NV, All rights reserved. Materialise, the Materialise logo, Mimics, 3-matic and HeartPrint are trademarks of Materialise NV in the EU, US and/or other countries. – L-10084 revision 10, 05/2018

51

Materialise HeartPrint

http://heartprint.materialise.com contact us at heartprint@materialise.com

© Materialise 2018

52

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52

Made with FlippingBook - professional solution for displaying marketing and sales documents online