Inductive coupler M30-8
Contact free transmission of energy and signals
Axial coupler
Application/customer bene ts • Contact free transmission of energy and signals between stationary and moved components • Application examples: Supply of sensors, supply and monitoring of remote systems • Dynamic Pairing • Wear and maintenance free • Protective functions: Temperature monitoring, foreign object detection, reverse polarity protection • Multi-level LED function display with good visibility Technical features • Mounting M30 x 1.5 • Supply voltage 24V (18 ... 30V) • Transmission distance 0 - 12 mm • Transmission of energy: 24V / 12W (500mA) • Transmission of signals: 8 digital signals • Id. No. Base: 0E011602 Id. No. Remote: 0E011603 • Interface: Remote female connector M12x1 (12-pin), base male connector M12x1 (12-pin)
Block diagram:
Control
8 digital signals
24V / 18W
Energy
0 - 8 mm
Base
Remote
Signals
Subject to technical changes. For more detailed information please ask our customer service.
Function Base LED Power Color
Function Remote LED Coupling Color
Green / red
Green / red
Off » Unit not supplied with voltage (or undervoltage) On (green) » 24V ok and mobile unit has been detected Flashes 2Hz green » 24V ok but no mobile unit detected Flashes 1Hz green / red » Incompatible mobile unit detected Flashes 2Hz red » Foreign object detected Flashes 5Hz red » Internal error
Off » Unit not connected On (green) » Unit connected, Voltage output DC24V ok Flashes 2Hz red » Unit connected but short circuit at DC24V Flashes 5Hz red » Internal error
Function
Function
LED Data Valid Color
Yellow / red
Off » No mobile unit detected On green » Mobile unit detected and signals are transmitted 2Hz red » Short circuit on at least one of the outputs Flashes 5Hz rot » Overload voltage output mobile unit
Function
10 SMW-AUTOBLOK
Made with FlippingBook Publishing Software