Inductive coupler F180 Ethernet / CAN
Contact free transmission of energy and signals
■ Stationary unit - Base ■ Mobile unit - Remote
Axial coupler
Base / Remote:
Base:
Remote:
C
C
H
H
H1
H1
Subject to technical changes. For more detailed information please ask our customer service.
Inductive coupler F180 Ethernet / CAN
Base
Remote
SMW-Electronics Type Id. No.
0E011244
0E011245
A B
mm mm mm mm mm mm mm mm mm
180
180
85 93
85 93
B1
C D
29.5
29.5
57 20
57 20
E F
5
5
H
34
34
H1
7
7
ɑ
60
60
degree
Housing material Protection class Function Base LED Power Color
Aluminium, GFK
Aluminium, GFK
IP 67
IP 67
Function Remote LED Actuator Color
green / red
Green / red
Off » Unit not supplied with voltage (or undervoltage) On (green) » Voltage ok and mobile unit has been detected 2Hz green 50 / 50% » Operating temperature in critical range 1Hz green 25 / 75% » Voltage ok but no mobile unit detected 1Hz red / green » Incompatible mobile unit detected 2Hz red » Foreign element detected 5Hz red » Internal error
Off » Unit not paired On (green) » Unit paired, voltage output actuator (48V) ok Flashes 2Hz red » Paired but short circuit on actuator (48V) Flashes 5Hz red » Internal error
Function
Function
LED Sensor supply / CAN Color Yellow / red
Off » Unit not paired On (yellow) » Unit paired, voltage output ok 2Hz yellow (75% / 25%) » CAN data is being transmitted (last 2s) 5Hz red » Internal error
LED Signal transmission Ethernet Color Yellow / red
Function
Off » No mobile unit detected On / yellow » Signal transmission ready 1Hz yellow » Data packets are being transmitted
LED Signal transmission Ethernet Color Yellow / red
Function
3Hz yellow » 50% of the transmission bandwidth used (10s) 8Hz red » Data packets were discarded (in the last 10s) On / red » Error in data transmission (internal error)
Off » No mobile unit detected On / yellow » Signal transmission ready 1Hz yellow » Data packets are being transmitted
LED Signal transmission CAN Color Yellow / red
3Hz yellow » 50% of the transmission bandwidth used (10s) 8Hz red » Data packets were discarded (in the last 10s) On / red » Error in data transmission (internal error)
Function
Off » Unit not paired On (yellow) » Unit coupled, voltage output ok 2Hz yellow (75% / 25%) » CAN data is being transmitted (last 2s) 5Hz red » Internal error
Function
SMW-AUTOBLOK 5
Made with FlippingBook Publishing Software