SEED FINISHING
FINISH PGRs
TECH TIPS
If needed sprays of B-Nine ® WSG at 2,500–5,000 are effective.
Control thrips to avoid Tospovirus.
FINISH PGRs
TECH TIPS
If grown at the recommended temperatures PGR applications should not be necessary. If needed sprays of B-Nine ® WSG at 2,500–5,000 are effective in helping control leaf size.
Avoid direct sunlight as leaf scorch may occur.
FINISH PGRs
TECH TIPS
B-Nine ® WSG at 2,500–5,000 ppm. If grown cool PGR applications are usually not necessary but under warm conditions one to three sprays of B-Nine ® WSG may be beneficial to control leaf size.
Control thrips to avoid Tospovirus.
FINISH PGRs
TECH TIPS
Since Magic Ranunculus is a genetically compact plant, plant growth regulators (PGRs) are not needed.
Control thrips to avoid Tospovirus.
FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 10–30 ppm, or A-Rest ® at 5–10 ppm.
If needed to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–1 ppm can be applied without delaying flowering. Practice a good wet/dry moisture cycle but avoid extremes of wet and dry. Salvias are sensitive to high salts, best to maintain EC levels below 2.0 mS/cm.
FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 10–30 ppm, or A-Rest ® at 5–10 ppm.
If needed, to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–-1 ppm can be used without delaying flowering. Practice a good wet/dry moisture cycle but avoid extremes of wet and dry. Salvias are sensitive to high salts, so maintain EC levels below 2.0 mS/cm.
FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 10–30 ppm, or A-Rest ® at 5–10 ppm.
If needed to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–1 ppm can be used without delaying flowering. Practice a good wet/dry moisture cycle but avoid extremes of wet and dry. Salvias are sensitive to high salts so maintain EC levels below 2.0 mS/cm.
FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 5–15 ppm, or A-Rest ® at 3–10 ppm.
If needed to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–1 ppm can be used without delaying flowering. Practice a good wet/dry moisture cycle, but avoid extremes of wet and dry. Salvias are sensitive to high salts, be sure to maintain EC levels below 2.0 mS/cm.
G R O W E R S U C C E S S G U I D E 2 0 2 2 – 2 0 2 3 | A N N U A L S
45
Made with FlippingBook Learn more on our blog