HTH® Stain Lift and Prevent 1kg
Product Description: Metals like copper and iron are introduced to pool water by certain pool products, low levels of pH and TA for extended periods, and certain water sources like borehole water. HTH Stain lift and prevent contains 1 pouch of stain remover used to lift metal stains from pool lining. 1 pouch of Stain Prevent is included to keep metals from re-depositing.
Features & benefits: - Contains 1 pouch Stain lift formulation - Contains 1 pouch Stain prevent the formulation - Ideal for use on localized metallic stains
Directions for use: Use only as directed.
(Based on a 50 000l pool)
1. 2. 3.
Adjust pH within range of 6.8 - 7.2 Brush affected area
Add contents of STAIN LIFT pouch around the sidces of the pool especially in the areas where the stains are noticeable. Set pump to CIRCULATE and run continuously for 24 hours In the case of stubborn stains, turn the pump off and apply contents of STAIN LIFT puch directly to the affected area. After 3 -4 hours, set the pool pump to CIRCULATE and run continuously fr 24 hours To prevent stains from re-depositing on the pool lining, add contents of STAIN PREVENT pouch and run the pump continuously for an additional 24 hours. Check/adjust the pH levels to 7.2 – 7.6 and ensure that the Total Alkalinity is in the 80 -120ppm range.
4.
5.
6.
NB: MOST STAINS ARE EASIER TO REMOVE WHEN THEY ARE FRESH. OLD OR DEEPLY-SET STAINS MAY REQUIRE A SECOND TREATMENT.
Made with FlippingBook Online newsletter maker