HTH® Dry Acid 3kg
Product Description: HTH Dry Acid is a convenient alternative to liquid pool acid that is used to reduce pH levels in your swimming pool. Maintain pH levels within the recommended range to treat cloudy water, prevent stains on the pool lining and prevent your eyes and skin from itching or burning. Features & benefits: - Used to reduce pH and Total Alkalinity levels - Fast-dissolve formula - Convenient to use, will not splash when added to water - Safer to handle than liquid acid
Directions for use: Use only as directed.
(Based on a 50 000l pool)
1.
pH should be kept between 7.2 - 7.6 to ensure effective sanitation, avoid eye and skin irritation and prevent damage to pool linings and equipment. Test pH level using HTH Quick Test Strips or HTH 4 in1 Test kit. With the filter running, add 250g (½ capful) of HTH® Dry Acid around the sides if the pool. Filter for 3-4 hours, test and readjust pH if necessary. If pH is still too high, continue to adjust down until within the required range of 7.2 -7.6
2. 3. 4. 5.
NB: Never add more than 500grams at a time . In the case of a vinyl or colored lining, pre-dissolve HTH® Dry Acid in a bucket of water before adding to the pool. To lower Total Alkalinity (TA)
1. 2. 3. 4. 5.
Switch the pump off Add 1KG of HTH® Dry Acid diluted in 5 liters of water, then Pour into one spot in the deep end of the pool. Leave the pump off for 15 minutes Switch the pump on and continue with normal filtration. Check the TA level after 12 hours. If necessary, repeat the process until the ideal range is reached
NB: NEVER ADD MORE THAN 1KG OF HTH® DRY ACID AT ANY ONE TIME. 1KG DROPS TA BY 10PPM IN 50 000L
Made with FlippingBook Online newsletter maker