HTH Brochure Happymarket _2023 - V5

Product Description: HTH Green to Blue is a two-step multifunctional pool care solution that sanitizes and clarifies problematic pool water. This product contains 1 pouch of nonstabilised chlorine shock and 1 pouch of a pH balancer/clarifier blend. This product is ideal to restore your pool water after adverse conditions like thunderstorms or a high bather load. Features & benefits: - Registered product (L5337 of Act 36 of 1947) - Turns green pools blue in 24 hours (if water parameters are within the recommended range) - Contains: 1 x pouch chlorine shock treatment (non-stabilised) and 1 x pouch pH balancer/water clarifier blend - Kills algae and bacteria - Reduces pH and Total Alkalinity levels - Contains a water clarifier HTH® Green to Blue Multifunctional Pool Care Solution

Directions for use: Use only as directed.

(Based on a 50 000l pool)

1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

Calculate size of pool and volume of water. Start the treatment in the late afternoon. Clear the pump and weir baskets of debris. BACKWASH the filter for 3 minutes, then RINSE for 2 minutes.

Scoop any visible leaves or other debris off the bottom of the pool to allow the automatic pool cleaner to move freely. Set the multiport valve to the FILTER position and set the timer to run for 12 continuous hours; turn the pump on. Sprinkle the contents of PACK 1 around the sides of the pool. Then separately sprinkle the contents of PACK 2 around the side of the pool. Brush all visible algae off pool walls and steps. Once the 12 hours of filtering is complete, clear the pump and weir baskets of debris.

BACKWASH the filter for 3 minutes and then RINSE for 2 minutes. Continue on FILTER for a further 12 hours.

1. 2. 3.

Remove the HTH® Sparkle It™ Cube from the packaging and add to pool – follow label directions. If the pool is very cloudy, add HTH® Xtreme Flocc – follow label directions. Do not enter the pool until the chlorine residual is <3 ppm.

First, add contents of Pack 1 to pool water. Only then, add contents of Pack 2 to pool water. If pool lining is fibreglass/coloured, first pre-dissolve the contents of Pack 1 ONLY in a bucket of water and then add to pool water. Thereafter, pre-dissolve contents of Pack 2 ONLY in a bucket of water and then add to pool water.

NB: DO NOT MIX THE CONTENTS OF PACK 1 WITH THE CONTENTS OF PACK 2 REACTION THAT CAN CAUSE DAMAGE, INJURY OR DEATH MAY OCCUR

Made with FlippingBook Online newsletter maker