HTH® Green Algaecide
Product Description: Green Algaecide is used to treat pool water with a slight green tinge/hue and prevents algae problems from getting out of hand. It also contains a built-in flocculant to trap fine particles and add sparkle to your pool. Features & benefits: - Registered Product (L3738 of Act 36 of 1947)
- Kills and removes Green Algae - Adds sparkle to your pool water - Use 2L of HTH Green Algaecide for every 50,000 liters of water
Directions for use: Use only as directed.
(Based on a 50 000l pool)
1. 2. 3. 4.
Free Available Chlorine (FAC) level must be below 1ppm. Disconnect the automatic pool cleaner. Backwash the filter for 2 mins and rinse the filter for 20 seconds. With the pump on the filter position and add one bottle of HTH® Green Algaecide around the sides of the pool. Run the filter for 24 hours. Again, backwash the filter for 2 mins and rinse the filter for 20 seconds. Vigorously brush the algae affected area.
5. 6. 7. 8. 9. 10.
Run the filter for a further 24 hours. Reconnect the automatic pool cleaner. Resume normal filtration and chlorination.
IN THE CASE OF SEVERE ALGAE, FOLLOW TREATMENT ABOVE AND THEN CORRECT THE PH LEVEL AND SHOCK TREAT BY EITHER USING 3 CUPS OF HTH® GRANULAR+ MINERALSOFT POOL CHLORINE™ OR 1 SACHET OF HTH® SHOCK IT®
Made with FlippingBook Online newsletter maker