Appl. Sci. 2023 , 13 , 1389
16of 17
the UTM holder. It is planned to mask the handle with black stickers. The authors are also looking for optimal image size settings, which will maximize the number of images recorded during the examination. Further research is also planned to develop an analytical model describing the phenomena occurring during paper compression and methods for determining the mechanism of paper destruction and the corresponding maximum force that destroys a paper sample. Author Contributions: Conceptualization, W.S.; methodology, W.S. and P.P.; software, P.P.; validation, P.P. and M.B.; formal analysis, Z.K.; investigation, Z.K.; resources, M.B.; data curation, M.B. and P.P.; writing—original draft preparation, P.P., Z.K. and W.S.; writing—review and editing, P.P., W.S., M.B. and Z.K.; visualization, P.P.; supervision, W.S.; project administration, W.S. All authors have read and
agreed to the published version of the manuscript. Funding: This research received no external funding. Institutional Review Board Statement: Not applicable. Informed Consent Statement: Not applicable.
Data Availability Statement: The data presented in this study are available on request from the corresponding author. The data is not publicly available due to the high degree of complexity of their organization. The authors have not yet developed an appropriate standard for their storage. Conflicts of Interest: The authors declare no conflict of interest.
References 1. Rzepa, S. Parametry papieru. In Proceedings of the Sympozjum Mondi Packaging “From Fibre to Corrugated Board”, S´wiecie, Poland, 1–2 December 2004. 2. Bai, J.; Wang, J.; Pan, L.; Lu, L.; Lu, G. Quasi-static axial crushing of single wall corrugated paperboard. Compos. Struct. 2019 , 226 , 111237. [CrossRef] 3. Czechowski, L.; Bien´kowska, M.; Szewczyk, W. Paperboard tubes failure due to lateral compression—Experimental and numerical study. Compos. Struct. 2018 , 203 , 132–141. [CrossRef] 4. Kołakowski, Z.; Szewczyk, W.; Bien´ kowska, M.; Czechowski, L. New method for evaluation of radial crush strength of paper cores. Mechanika 2018 , 24 , 169–173. [CrossRef] 5. Gajewski, T.; Garbowski, T.; Staszak, N.; Kuca, M. Crushing of double-walled corrugated board and its influence on the load capacity of various boxes. Energies 2021 , 14 , 4321. [CrossRef] 6. Yu-Ping, E.; Wang, Z.-W. Plateau stress of paper honeycomb as response to various relative humidities. Packag. Technol. Sci. 2010 , 23 , 203–216. [CrossRef] 7. Abb è s, B.; Guo, Y.Q. Analytic homogenization for torsion of orthotropic sandwich plates: Application to corrugated cardboard. Compos. Struct. 2010 , 92 , 699–706. [CrossRef] 8. Semple, K.E.; Sam-Brew, S.; Deng, J.; Cote, F.; Yanm, N.; Chen, Z.; Smith, G.D. Properties of commercial Kraft paper honeycomb furniture stock panels conditioned under 65 and 95 percent relative humidity. For. Prod. J. 2015 , 65 , 106–122. [CrossRef] 9. Kmita-Fudalej, G.; Szewczyk, W.; Kołakowski, Z. Calculation of honeycomb paperboard resistance to edge crush test. Materials 2020 , 13 , 1706. [CrossRef] [PubMed] 10. Fadiji, T.; Ambaw, A.; Coetzee, C.J.; Berry, T.M.; Opara, U.L. Application of finite element analysis to predict the mechanical strength of ventilated corrugated paperboard packaging for handling fresh produce. Biosyst. Eng. 2018 , 174 , 260–281. [CrossRef] 11. Li, X.; Wang, J.; Chuang, C.; Gao, D.; Lu, G.; Lu, L.; Wang, Z. Mathematical models for predicting the quasi-static stress characteristics of corrugated paperboard with sinusoidal core along the longitudinal compression. Int. J. Mech. Sci. 2018 , 149 , 136–149. [CrossRef] 12. Kubiak, T.; Kolakowski, Z.; Swiniarski, J.; Urbaniak, M.; Gliszczynski, A. Local buckling and post-buckling of composite channel-section beams—Numerical and experimental investigations. Compos. Part B 2016 , 91 , 176–188. [CrossRef] 13. Mou, X.-N.; Lu, L.-X.; Zhou, Y.-L. Evaluation of in-plane compressive densification strain of honeycomb paperboard. Adv. Mech. Eng. 2020 , 12 , 1–11. [CrossRef] 14. Smardzewski, J.; Prekrat, S. Modelling of thin paper honeycomb panels for furniture. In Proceedings of the International Conference Ambienta, Wood is Good—With Knowledge and Technology to a CompetitiveForestry and Wood Technology Sector, Zagreb, Croatia, 12 October 2012; pp. 179–186. 15. PN-EN ISO 3035: 2011 ; Tektura Falista Oznaczanie Odpornos´ci na Zgniatanie Płaskie. Polski Komitet Normalizacyjny: Warsaw, Poland, (Polish Standard); 2011. 16. Murray, N.W.; Khoo, P.S. Some basic plastic mechanism in the local buckling of thin-walled steel structures. Int. J. Mech. Sci. 1981 , 23 , 703–713. [CrossRef]
Made with FlippingBook Digital Publishing Software