[6] Räisänen K, Karrila, S., Maijala, A. Vacuum dewatering optimization with different furnishes. Pap Puu-Pap Tim. 78(8) (1996) 455-, [7] Baldwin L. High vacuum dewatering. Paper Technology. 38(4) (1997) 23-8, [8] Räisänen KO. Vacuum systems. In: Gullichsen HPJ, editor. Papermaking part 1: Stock preparation and wet end 2000. p. 417-30. [9] Sjöstrand B. Vacuum Dewatering of Cellulosic Materials: Karlstad University; 2020. [10] Wahlstrom B. Wet pressing in the 20th century: Evolution, understanding and future. Pulp Pap-Canada. 102(12) (2001) 81-8, [11] Kuhasalo A, Niskanen, J., Paltakari, J., Karlsson, M. Introduction to paper drying and principles and structure of a dryer section. In: Gullichsen PJ, editor. Papermaking part 2, Drying 2000. p. 16-53. [12] Granevald R, Nilsson LS, Stenstrom S. Impact of different forming fabric parameters on sheet solids content during vacuum dewatering. Nord Pulp Pap Res J. 19(4) (2004) 428-33, https://doi.org/DOI 10.3183/npprj-2004-19-04- p428-433 [13] Pujara J, Siddiqui MA, Liu Z, Bjegovic P, Takagaki SS, Li PY, et al. Method to characterize the air flow and water removal characteristics during vacuum dewatering. Part I - Experimental method. Dry Technol. 26(3) (2008) 334-40, https://doi.org/10.1080/07373930801898091 [14] Aslund P, Vomhoff H. Method for studying the deformation of a fibre web during a suction pulse. Nord Pulp Pap Res J. 23(4) (2008) 398-402, https://doi.org/DOI 10.3183/npprj-2008-23-04- p398-402 [15] Sjöstrand B, Barbier, C., & Nilsson, L. . Influence on sheet dewatering by structural differences in forming fabrics. Paper Conference and Trade Show Cincinnati, Ohio, USA2016. p. 767- 76. [16] Sjostrand B, Barbier C, Nilsson L. Modeling the influence of forming fabric structure on vacuum box dewatering. Tappi J. 16(8) (2017) 477-83, https://doi.org/Doi 10.32964/Tj16.8.477 [17] Sjostrand B, Barbier C, Ullsten H, Nilsson L. Dewatering of Softwood Kraft Pulp with Additives of Microfibrillated Cellulose and Dialcohol Cellulose. Bioresources. 14(3) (2019) 6370-83, https://doi.org/10.15376/biores.14.3.6370- 6383 [18] Rahman H, Engstrand P, Sandstrom P, Sjostrand B. Dewatering properties of low grammage handsheets of softwood kraft pulps modified to minimize the need for refining. Nord Pulp Pap Res J. 33(3) (2018) 397-403, https://doi.org/10.1515/npprj-2018-3037 [19] Sjostrand B, Brolinson A. Addition of Polyvinylamine in Chemi-thermomechanical Pulp and Kraft Pulp and the Effects on Dewatering, Strength, and Air Permeance. Bioresources. 17(3) (2022) 4098-115, https://doi.org/10.15376/biores.17.3.4098-4115
[20] Sjostrand B, Danielsson M, Lestelius M. Method for Studying Water Removal and Air Penetration during Through Air Drying of Tissue in Laboratory Scale. Bioresources. 18(2) (2023) 3073- 88, https://doi.org/10.15376/biores.18.2.3073-3088 [21] Sjostrand B. Progression of Vacuum Level in Successive Vacuum Suction Boxes in a Paper Machine-Impact on Dewatering Efficiency and Energy Demand-A Laboratory Study. Bioresources. 18(2) (2023) 3642-53, https://doi.org/10.15376/biores.18.2.3642-3653 [22] Britt KW, Unbehend JE. Water Removal during Paper Formation. Tappi J. 68(4) (1985) 104- 7, [23] Granevald R. Vacuum dewatering of low- grammage paper webs and fabrics.: Karlstad University; 2005. [24] Aslund P, Vomhoff H, Waljanson A. The deformation of chemical and mechanical pulp webs during suction box dewatering. Nord Pulp Pap Res J. 23(4) (2008) 403-8, https://doi.org/DOI 10.3183/npprj-2008-23-04-p403-408 [25] Pujara J, Siddiqui MA, Liu Z, Bjegovic P, Takagaki SS, Li PY, et al. Method to characterize the air flow and water removal characteristics during vacuum dewatering. Part II - Analysis and characterization. Dry Technol. 26(3) (2008) 341-8, https://doi.org/10.1080/07373930801898125 [26] Jackson GW, James DF. The Permeability of Fibrous Porous-Media. Can J Chem Eng. 64(3) (1986) 364-74, https://doi.org/DOI 10.1002/cjce.5450640302 [27] Zhu S, Pelton RH, Collver K. Mechanistic Modeling of Fluid Permeation through Compressible Fiber Beds. Chem Eng Sci. 50(22) (1995) 3557-72, https://doi.org/Doi 10.1016/0009- 2509(95)00205-J [28] Nilsson L, Stenstrom S. A study of the permeability of pulp and paper. Int J Multiphas Flow. 23(1) (1997) 131-53, https://doi.org/Doi 10.1016/S0301-9322(96)00064-X [29] Matthews GP. Computer modelling of fluid permeation in porous coatings and paper - an overview. Nord Pulp Pap Res J. 15(5) (2000) 476- 85, https://doi.org/DOI 10.3183/npprj-2000-15-05- p476-485 [30] Nilsson L. Stepwise Development of a Mathematical Model for Air Flow in Vacuum Dewatering of Paper. Dry Technol. 32(13) (2014) 1587-97, https://doi.org/10.1080/07373937.2014.909844 [31] Rezk K, Nilsson L, Forsberg J, Berghel J. Modelling of water removal during a paper vacuum dewatering process using a Level-Set method. Chem Eng Sci. 101 (2013) 543-53, https://doi.org/10.1016/j.ces.2013.07.005 [32] Rezk K, Nilsson L, Forsberg J, Berghel J. Simulation of Water Removal in Paper Based on a 2D Level-Set Model Coupled with Volume Forces Representing Fluid Resistance in 3D Fiber Distribution. Dry Technol. 33(5) (2015) 605-15, https://doi.org/10.1080/07373937.2014.967401
6
Made with FlippingBook Online newsletter maker