PAPER making! FROM THE PUBLISHERS OF PAPER TECHNOLOGY INTERNATIONAL Volume 6, Number 1, 2020
investigate the interactions between the common additives used in paper production and nanocelluloses. It was found that the different properties of the studied nanocelluloses led to very different interactions with the paper components. In this sense, by properly selecting the furnish to use (in terms of nanocellulose typology and presence or absence of each additive), high improvements of filler retention and dry and wet--web strength, as well as reduced surface roughness and water penetration, could be achieved. Lignocellulosic nanofibers for the reinforcement of brown line paper in industrial water systems, Quim Tarrés et al, Cellulose (2020), online . The addition of nanofibrillated cellulose in paper production requires attention to its dispersion and retention during the paper forming process, and this is commonly facilitated by the use of retention agents. The performance of retention agents, which commonly have a cationic charge, is affected by the presence of dissolved and colloidal substances in the process water. In the process of paper production at an industrial level, especially when using recycled paper, there are a large amount of dissolved and colloidal substances in the water. A high proportion of these substances are negatively charged and are commonly referred to as anionic trash. Its presence increases the conductivity and charge density of the water, and this has a negative influence on the retention of cellulose nanofibers. In brown line paper production, some fibers have already been refined in at least one previous papermaking cycle. In this sense, recycled fibers have a reduced capacity to benefit from refining as they have suffered morphological damage. On the other hand, the addition of lignocellulosic nanofibers in the production of brown line paper has been found helpful to improve its properties and extend its lifespan. In this work the influence on the retention of nanofibers of different anionic trash levels in the water has been evaluated. The results showed its viability as a reinforcing agent in waters with high anionic trash content, through the addition of an anionic trash catching system. Design and Synthesis of Fluorescent Nanocelluloses for Sensing and Bioimaging Applications, Prof. Zhao Zhang et al, ChemPlusChem, Vol.85(3) . Recent materials research based on fluorescent nanocelluloses (NCs) used in the field of sensing and bioimaging is reviewed. Many designed morphologies have been reported, such as nanoparticles, fibers, nanopapers, hydrogels and aerogels, that have been produced by physical or chemical methods. In the field of sensing and bioimaging, these studies have involved, but not been limited to, special optical properties including fluorescence, long Ǧ lived luminescence, polarized light, and/or aggregation Ǧ induced emission. The fluorescence sensing platforms can be categorized according to stimuli such as pH and temperature, as well as the presence of toxic compounds, and anions and metal cations. In addition, NCs exhibit unique low toxicity, good biocompatibility, biodegradability and cell membrane penetration, and can be modified into fluorescent nanoprobes for in vivo imaging and tracing. As an excellent platform for fluorescent sensing and bioimaging, NCs are bound to be increasingly studied and widely applied in the field of production and life sciences. NOVEL PRODUCTS Greaseproof Paper Products: A Review Emphasizing Ecofriendly Approaches, Martin A. Hubbe & Przem Pruszynski, BioResources, Vol.15(1) . A cost-effective, eco- friendly, and health-promoting packaging system that prevents the passage of greases and oils would fulfill an urgent need. This review discusses what is known about the highly divergent technological paths that have been studied to achieve these objectives. Before the emergence of plastic films, the paper industry addressed these objectives in two ways, by parchmentizing and by high levels of refining of the fibers. Parchmentizing means
Technical Abstracts
Page 5 of 24
Made with FlippingBook Digital Publishing Software