bioresources. com
PEER-REVIEWED ARTICLE
DOI: 10.1016/j.jclepro.2014.05.029 ISO 14040 (2006). “ Environmental management - Life cycle assessment - Principles and framework, ” International Organization for Standardization, Geneva, Switzerland. ISO 14044 (2006). “ Environmental management - Life cycle assessment - Requirements and guidelines ,” International Organization for Standardization, Geneva, Switzerland. Kirchain Jr., R. E., Gregory, J. R., and Olivetti, E. A. (2017). “Environmental life -cycle assessment,” Nat. Mater. 16(7), 693-697. DOI: 10.1038/nmat4923 Kouchaki-Penchah, H., Sharifi, M., Mousazadeh, H., and Zarea-Hosseinabadi, H. (2016). “Life cycle assessment of medium -density fiberboard manufacturing process in Islamic Republic of Iran,” J. Clean. Prod. 112, 351-358. DOI: 10.1016/j.jclepro.2015.07.049 La Rosa, A. D., Cozzo, G., Latteri, A., Recca, A., Björklund, A., Parrinello, E., and Cicala, G. (2013). “Life cycle assessment of a novel hybrid glass -hemp/thermoset composite,” J. Clean. Prod. 44, 69-76. DOI: 10.1016/j.jclepro.2012.11.038 Li, K., and Geng, X. (2004). “Investigation of formaldehyde -free wood adhesives from kraft lignin and a polyaminoamide- epichlorohydrin resin,” J. Adhes. Sci. Technol. 18(4), 427-439. DOI: 10.1163/156856104323016333 Li, S., Li, N., Li, G., Li, L., Wang, A., Cong, Y., Wang, X., and Zhang, T. (2015). “Lignosulfonate -based acidic resin for the synthesis of renewable diesel and jet fuel range alkanes with 2- methylfuran and furfural,” Green Chem. 17(6), 3644-3652. DOI: 10.1039/c5gc00372e Li, X., Li, Y., Zhong, Z., Wang, D., Ratto, J. A., Sheng, K., and Sun, X. S. (2009). “Mechanical and water soaking properties of medium density fiberboard with wood fiber and soybean protein adhesive, ” Bioresour. Technol. 100(14), 3556-3562. DOI: 10.1016/j.biortech.2009.02.048 Linkosalmi, L., Husgafvel, R., Fomkin, A., Junnikkala, H., Witikkala, T., Kairi, M., and Dahl, O. (2016). “Main factors influencing greenhouse gas emissions of wood -based furniture industry in Finland,” J. Clean. Prod. 113, 596-605. DOI: 10.1016/j.jclepro.2015.11.091 Liu, Y., and Li, K. (2006). “Preparation and characterization of demethylated lignin - polyethylenimine adhesives,” J. Adhesion 82(6), 593-605. DOI: 10.1080/00218460600766632 Luz, S. M., Caldeira-Pires, A., and Ferrã o, P. (2010). “Environmental benefits of substituting talc by sugarcane bagasse fibers as reinforcement in polypropylene composites: Ecodesign and LCA as strategy for automotive components,” Resour. Conserv. Recy. 54(12), 1135-1144. DOI: 10.1016/j.resconrec.2010.03.009 Mancera, C., El Mansouri, N.-E., Vilaseca, F., Ferrando, F., and Salvado, J. (2011). “ The effect of lignin as a natural adhesive on the physico-mechanical properties of Vitis vinifera fib erboards,” BioResources 6(3), 2851-2860. DOI: 10.15376/biores.6.3.2851- 2860 Myers, M. (2016). “Economics: China in the new world,” Nature 531(7593), 169-170. DOI: 10.1038/531169a Nakano, K., Ando, K., Takigawa, M., and Hattori, N. (2018). “Life cycle assessment of wood-based boards produced in Japan and impact of formaldehyde emissions during the use stage,” Int. J. Life Cycle Assoc. 23(4), 957-969. DOI: 10.1007/s11367-017- 1343-6 Peters, J., Buchholz, D., Passerini, S., and Weil, M. (2016). “Life cycle assessment of sodium- ion batteries,” Energ. Environ. Sci. 9(5), 1744-1751.
2756
Li et al . (2019 ). “Wardrobe case study in China,” B io R esources 14(2), 2740-2758.
Made with FlippingBook Digital Publishing Software