bioresources. com
PEER-REVIEWED ARTICLE
4. In terms of mechanical properties, poplar-pine particleboards exhibited the best performance.
ACKNOWLEDGMENTS The authors are grateful for the support of the National Centre for Research and Development, Grant. No. LIDER/002/406/L-4/NCBR/2013. REFERENCES CITED Abdul Khalil, H. P. S., Nur Firdaus, M. Y., Jawaid, M., Anis, M., Ridzuan, R., and Mohamed, A. R. (2010). “Development and material properties of new hybrid medium density fibreboard from empty fruit bunch and rubberwood,” Materials and Design 31(9), 4229-4236. DOI: 10.1016/j.matdes.2010.04.014 Buschbeck, L., Kehr, E., and Jensen, U. (1961a). “Untersuchungen über die Eignung verschiedener Holzarten und sortimente zur Herstellung von Spanplatten - 1. Mitteilung: Rotbuche und Kiefer (Studies on the suitability of various wood species and assortments for particle- board manufacture. 1. Beech and Scots Pine),” Holztechnologie 2(2), 99-110. Buschbeck, L., Kehr, E., and Jensen, U. (1961b). “Untersuchungen über die Eignung verschiedener Holzarten und sortimente zur Herstellung von Spanplatten - 2. Mitteilung: Kiefernreiserholz (Studies on the suitability of various wood species and assortments for particle-board manufacture. 2. Pine small- wood),” Holztechnologie 2(3), 195-201. Cai, Z., Birkeland, M., Wescott, J. M ., O’ Dell, J., and Winandy, J. E. (2009). “Effects of press sizes on internal steam pressure during particleboard hot- pressing process,” Forest Products Journal 59(4), 40-44. Carle, J. B., and Holmgren, L. P. B. ( 2009). “Wood from planted forests: Global outlook to 2030 ,” Planted Forests: Uses, Impacts and Sustainability , J. Evans (ed.), CAB International and Food and Agriculture Organization of the United Nations, Rome, Italy. DOI: 10.1079/9781845935641.0047 CEN/TS 16368 (2014) . “Lightweight particleboards - Specifications, ” European Committee for Standardization , Brussels, Belgium. Clad, W. (1982). “Die Rohdichtesenkung bei Spanplatten, Eine Literaturübersicht,” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 40(10), 387- 393. DOI: 10.1007/BF02610724 Dai, C., Wasylciw, W., and Jin, J. (2004). “Comparison of pressing behavior of wood particleboard and strawboard,” Wood Science and Technology 38(7), 529-537. DOI: 10.1007/s00226-004-0256-2 Dunky, M. (2001). “Wood based panels: An interdisciplinary ap proach,” Proceedings of the Fifth European Panel Products Symposium, Llandudno, UK, 10-12 October, pp. 1-14. European Standard EN 310 (1993). “Wood -based panels - Determination of modulus of elasticity in bending ,” European Committee for Standardization , Brussels, Belgium. European Standard EN 312 (2010) . “ Particleboards - Specifications, ” European Committee for Standardization , Brussels, Belgium.
6917
Boruszewski et al . (2016 ). “Particleboard density ,” B io R esources 11(3), 6909-6919.
Made with FlippingBook Ebook Creator