bioresources. com
PEER-REVIEWED ARTICLE
European Standard EN 319 (1993). “Particleboards and fibreboards - Determination of tensile strength perpend icular to the plane of the board,” European Committee for Standardization , Brussels, Belgium. Gatani, M. P., Fiorelli, J., Medina, J. C., Arguelo, R., Ruiz, A., Nascimento, M. F., and Savastano, H. Jr. (2013). “Technical production viability and properties of particleboard made with peanut husks,” Revista Materia 18(2), 1286-1293. DOI: 10.1590/S1517-70762013000200004 Grigoriu, A. (1981). “Der Einflu ß verschiedener Holzarten auf die Eigenschaften dreischichtiger Spanplatten und deren Deckschichten,” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 39(3), 97-105. DOI: 10.1007/BF02606283 Haelvoet, W., and Medved, S. (2009). “Moisture resistance of wood - based panels,” in: Performance in Use and New Products of Wood Based Composites , M. Fan (ed.), Brunel University Press, London, UK, pp. 23-46. Kelly, M. W. (1977). “Critical literature review of relationship between processi ng parameters and physical prop erties of particleboard,” Gen. Tech. Rep. FPL-10 , U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI. Keylwerth, R. (1958). “Zur Mechanik der mehrschichtigen Spanplatte,” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 16(11), 419-430. DOI: 10.1007/BF02617779 McDonald, A. G., Gifford, J. S., Dare, P. H., and Steward, D. (1999a). “Characterisation of the condensate generated from vacuum- drying of radiata pine wood,” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 57(4), 251-258. DOI: 10.1007/s001070050052 McDonald, A. G., Steward, D., and Franich, R. A. (1999b). “Monoterpene composition of radiata pine ( Pinus radiata D. Don) sapwood from a 13 year old progeny trial,” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 57(4), 301-302. DOI: 10.1007/s001070050063 Medved, S., and Resnik, J. (2006). “Impact of beech particle size on compaction ratio of the surface layer,” Wood Research 52(3), 101-108. Meinlschmidt, P., Schirp, A., Dix, B., Thole, V., and Brinker, N. (2008). “Agricultural residues with light parenchyma cells and expandable filler materials for the production of lightweight particleboards,” Proceedings of the International Panel Products Symposium , Espoo, Finland, 24-26 September, pp. 179-188. Miyamoto, K., Suzuki, S., Inagaki, T., and Iwata, R. (2002). “Effects of press closing time on mat consolidation behavior during hot pressing and linear expansion of particleboard,” Journal of Wood Science 48(4), 309-314. DOI: 10.1007/BF00831352 Moslemi, A. A. (1974). Particleboard Vol. 2: Technology , Southern Illinois University Press, Carbondale, IL. Nemli, G., Aydin, I., and Zekovic, E. (2007). “Evaluation on some of the properties of particleboard as function of manufacturing parameters,” Materials and Design 28(4), 1169-1176. DOI: 10.1016/j.matdes.2006.01.015 Nicewicz, D., Boruszewski, P., and Klimczewski, M. (2012). “Influence of addition of wood from containers and pallets and selected technological parameters on the properties of MDF,” Wood Research 57(2), 309-315. Niemz, P. (1993). Physik des Holzes und der Holzwerkstoffe , DRW-Verlag Weinbrenner GmbH & Co., Leinfelden-Echterdingen, Germany.
6918
Boruszewski et al . (2016 ). “Particleboard density ,” B io R esources 11(3), 6909-6919.
Made with FlippingBook Ebook Creator